1-800-876-5520 • gardeners.com
8% of our profits
go back to our communities.
Learn more at gardeners.com/
FoRCE-FoR-GoOD
Parts List
Tools
Required
1. Slide 1 Pre-Assembled Panel without corners in between
2
P
re-
A
ssembled
P
anels
with outside & in-line corners. With the in-line
corners in the middle and the outside corners on the end. Make sure
t
all three pieces are flush with the corners before screwing
together.
Rev 8/2023
#
8614028
Cedar Three Bin Composter
PLEASE
RECYCLE
2. Place 2
P
re-
A
ssembled
P
anels without corners into the outside corners
on both sides to form the ends of the composter, the
vertical wood strips should face into the composter. Make
sure they are flush with the top and
bottom
before screwing together.
(2)
Pre-Assembled Panels
with
outside & in-line
corners
(5)
Pre-Assembled Panels without corners
(2) Pre-Assembled Front Panels with outside & in-line corners
& front door
(1) Pre-Assembled Front Panel with a front door
(3) Top Lids (center is smallest)
(1) Barrel Bolt with screws
(8) Plastic Caps
(
96
)
.75"
Screws
(2) 3.5" x 24" Boards for center bin
(8) 1.5" Screws for 2 center bin boards
Power Drill
with Phillips Head
Assembly easiest with two people
Allot 90 minutes for assembly
with 2 people
