67
GB
66
GB
Warranty
7. Putting Out of Operation
v
Store your Watering Controller away from frost before the first
frost sets in.
Only dispose of batteries when they are flat.
v
Return flat batteries to the place you bought them
or
dispose of them properly at your local recycling / disposal centre.
8. Technical Data
Power supply from power supply unit :
24 V (AC)
Power supply for memory in case of
Alkaline battery 9 V IEC 6LR61
mains power failure :
Operating temperature :
From frost to + 50 °C
Storage temperature :
– 20 °C to + 50 °C
Air humidity :
20 % to 95 % relative humidity
Soil moisture / rain sensor connection :
GARDENA-specific
Program saved when replacing battery :
Yes (if power supply unit connected)
Number of channels :
6 and one master channel
Number of program-controlled
watering cycles per channel :
Up to 4
Watering duration per program :
1 minute to 9 hours 59 minutes
9. Service
GARDENA guarantees this product for 2 years (from date of
purchase). This guarantee covers all serious defects of the unit
that can be proved to be material or manufacturing faults. Under
warranty we will either replace the unit or repair it free of charge
if the following conditions apply:
•
The unit must have been handled properly and in keeping
with the requirements of the operating instructions.
•
Neither the purchaser or a non-authorised third party have
attempted to repair the unit.
GARDENA will not replace Watering Controllers with defects result-
ing from incorrect installation of the battery or leaking batteries.
This manufacturer’s guarantee does not affect the user’s existing
warranty claims against the dealer / seller.
If you have any problems with your pump, please contact our
Customer Service or return the defective unit together with
a short description of the problem directly to one of the
GARDENA Service Centres listed on the back of this leaflet.
Wintering :
Important :
If you do not require automatic watering, for example during
long rainy spells, you can block the appropriate channels without
having to delete the corresponding watering program.
1. Press and hold down the
OK
key and then press the relevant
Channel
key.
2. To reactivate the channel again, press and hold down the
OK
key and then press the relevant
Channel
key.
Tip :
Should you have any questions about operating or pro-
gramming your Watering Controller, please do not hesitate to
contact your nearest GARDENA Service Centre. We will be
happy to help you.
6. Trouble-Shooting
1. Unplug the mains plug of the 24 V (AC) power supply unit.
2. Unscrew the screws
1
of the connection box and remove the
cover.
3. Remove the fuse
7
and install a new fuse
8
(1-A slow-blowing
fuse).
4. Fit the cover on the connection box and screw in the screws
1
.
5. Plug the mains plug of the 24 V (AC) power supply unit into a
230-V mains socket.
Fault Possible
Cause
Remedy
No display
External temperature below
v
Wait until the external air
–10 °C or above + 50 °C.
temperature returns to the
operating temperature
range.
LCD display shows
The fuse has blown.
1. Check the wiring diagram
EERRRROORR FFUUSSEE
and / or determine the
cause.
2. Replace the fuse.
LCD display shows
The power supply unit is not
v
Plug the power supply unit
EERRRROORR
no
AACC
plugged in (the programs are
into a mains socket.
not deleted).
If you have any other problems with your Watering Controller, please contact your nearest GARDENA
Service Centre.
Blocking channels :
Replacing the fuse :
1
8
1
7
