Work positions:
The unit can be operated in 2 work positions (above / below).
To ensure a tidy cutting edge, thick branches should be cut in
2 steps (Illustrations similar).
m
ax.
4,4
m
ma
x.
4,4
m
A
ß
B
ß
Above
(thick branches):
1. From below, saw
the branch to no
more than 1/3 of the
dia meter (chain will
push towards the stop
at the front
ß
A
).
Above
(thick branches):
2. Cut off the branch
from above (chain
will push towards the
stop at the back
ß
B
).
Below:
Cut off from above
(chain will push towards
the stop at the back
ß
B
).
To start the Pruner:
1
3
2
i
p
o
DANGER! Risk of physical injury!
Risk of injury if the unit does not stop when you
release the start button.
v
Do not bypass the safety devices or switches. For example
do not attach the starting lock-out
i
or start button
o
to
the handle.
Verify that the following conditions are met before commencing
work:
• The tank has been filled with sufficient chain oil and the lubrication
system has been checked (see 3. INSTALLATION).
• The chain is tensioned (see 5. MAINTENANCE).
To start:
The unit is fitted with a starting lock-out
i
to prevent the unit from
being turned on by accident.
1. Open the snap fit
3
and remove the protective cover
1
from the
bar
2
.
2. Hold the telescopic pipe of the unit with one hand and the
handle
p
with the other hand.
3. Push the starting lock-out
i
forwards and push the start
button
o
.
The unit will start.
4. Release the starting lock-out
i
.
To stop:
1. Release the start button
o
.
2. Slide the protective cover
1
onto the bar
2
and close the
snap fit
3
.
8
GB
