Low and Medium security prohibits access to the robotic
lawnmower if the PIN code is unknown.
High security
also includes a warning that beeps if the correct PIN
code is not entered after a designated time period.
If the wrong PIN code is entered 5 times in succession
the robotic lawnmower is blocked for a time. The
blockage time is extended for every new incorrect
attempt.
Function
Low
Medium
High
Time lock
X
X
X
PIN request
X
X
Alarm
X
3.15.1.1 Time lock
This function means that the robotic lawnmower cannot
be started after 30 days without first entering the correct
PIN code. When the 30 days has passed the robotic
lawnmower will continue to mow as normal, but the
Enter PIN code message appears when the hatch is
opened. Enter your code again and press OK.
3.15.1.2 PIN request
This function means that the robotic lawnmower
requests a PIN code when the main switch is set to
1
and each time the hatch is opened. The correct PIN
code must be entered to use the robotic lawnmower.
If the wrong PIN code is entered 5 times in succession
the robotic lawnmower is blocked for a time. The
blockage time is extended for every new incorrect
attempt.
3.15.1.3 Alarm
This function means that an alarm sounds if the PIN
code is not entered within 10 seconds after the STOP
button has been pressed or the robotic lawnmower has
been lifted up for any reason. A ticking noise indicates
that the PIN code must be entered to prevent triggering
the alarm. The alarm can be turned off at any time by
entering the correct PIN code.
3.15.2 Advanced
Advanced
New loop signal
Change PIN code
3.15.2.1 New loop signal
The loop signal is randomly selected to create a unique
link between the robotic lawnmower and the charging
station. In rare cases, there may be a need to generate
a new signal, for instance if two adjacent installations
have a very similar signal.
1. Place the robotic lawnmower in the charging station.
2. Select
New loop signal in the menu.
3. Press OK and await confirmation that the loop signal
has been generated. This normally takes about 10
seconds.
3.15.2.2 Change PIN code
Enter the new PIN code and press OK. Confirm by
entering the same code again and pressing OK. When
the PIN code is changed, the message
PIN code
changed appears in the display.
Make a note of the new PIN code on the designated line
in Memo. See
3.16 Installation
For many working areas there is no need to change the
factory settings but sometimes, depending on the lawn
complexity, the mowing result can be improved by
making manual settings.
INSTALLATION
Advanced
Lawn coverage
3.16.1 Lawn coverage
This menu function is used to steer the robotic
lawnmower to remote parts of a working area. In
complex gardens with for instance many areas which
are joined by narrow passages, the mowing result can
be much improved by changing settings.
Up to 3 remote areas can be set. Select an area using
the left and right arrow keys followed by OK.
Lawn coverage
Area 1
Area 2
Area 3
Area3
Area2
Area1
A number of unique selections are required to allow the
robotic lawnmower to reach the remote area.
26 - Installation
307 - 002 - 11.10.2017
