21
G
Dismantling of the Light Effect Jets
.
Disconnect plug transformer!
.
Remove the jet from the pump.
.
Pull off the top section of the jet of the light base.
.
Pull out the lamp.
.
Assemble the components in reverse order of the dismantling.
➔
While assembling take care that the cable of the lamp is
correctly inserted into the side slot!
Only 12 V halogen lamps of max. 5 watts may be used!
.
Disconnect plug transformer!
.
Take the jet out of the pump.
.
Unscrew the jet from the light base.
.
Pull off the bottom section of the light base.
.
Pull out the lamp.
.
Assemble the components in reverse order of the dismantling.
➔
While assembling take care that the cable of the lamp is
correctly inserted into the side slot!
Only 12 V halogen lamps of max. 5 watts may be used!
Water jet (WLP 300 S)
Light sphere (WLP 300 B)
Water jet (WLP 300 S)
Light sphere (WLP 300 B)
20
G
Avoid dry operation of the pump as dry running will produce
undesirable heat and destroy the pump.
Only for WLP 300 S and WLP 300 B
Control / Setting of the Light Effect Jets
The light effects can be controlled with the volume control of
the pump (
➔
see “Operation”).
.
Smaller diameters of light sphere:
Turn the light effect control anti-clockwise upwards
.
Bigger diameters of light sphere:
Turn the light effect control clockwise downwards.
Avoid dry operation
