15
GB
Working positions :
Side trimming:
Cutting unit
rotated by 90°
Vertical trimming
at high level :
Telescopic tube
extended
Horizontal
trimming at
high level :
Cutting head
tilted by 75°,
telescopic tube
extended
Trimming at low
level :
Cutting head
extended by
-45°, telescopic
tube extended
Rotate cutting unit
through 90° :
Tilting the swivel head :
The hedge trimmer can be operated in 4 working positions.
For sideways cutting, the cutting unit can be rotated through 90°.
The cutting unit
4
can be turned to the right or left for right-
handed or left-handed users respectively.
1. Disconnect mains plug.
2. Keep button
3
pressed.
3. Turn cutting unit
4
90° in the required direction until the
button
3
locks into place.
A safety device prevents the Hedge Trimmer from starting up when
the button
3
is pressed or not locked in 0° or 90° position.
For trimming at high and low level, the swivel head
2
can be
tilted at an angle of 75° to -45° in 15° increments.
1. Unplug the mains plug.
2. Hold down the button
1
.
3. Tilt the swivel head
2
in the direction wanted.
4. Release the button
1
and allow it to engage.
A safety device prevents the hedge trimmer from starting when
the button is depressed or not engaged
1
or when the tilting
angle exceeds -45° (packing position).
3
4
2
1
