GB
15
6. Troubleshooting
DANGER ! Electric shock !
A
V
Always unplug the mains plug and slide the
protective cover
1
over the cutter blade
2
before troubleshooting.
Fault Possible
Cause
Remedy
Hedge trimmer does not start
Extension cable not plugged
v
Plug in the extension cable
in or is damaged.
or if necessary replace it.
Cutting unit not locked in 0° or
v
Lock cutting unit in 0° or
90° position.
90° position.
Hedge is not cleanly cut
Blade blunt or damaged.
v
Have blade replaced by
GARDENA-Service.
A
In the event of other faults please contact GARDENA Service.
Repairs should only be carried out by GARDENA service centres or dealers
authorised by GARDENA.
7. Accessories
GARDENA Maintenance Oil
Extends the life of the blade.
Art. 2366
8. Technical Data
ErgoCut 48 (Art. 8875)
ErgoCut 58 (Art. 8876)
Power consumption, motor
550 W
550 W
Voltage / Frequency
230 V / 50 Hz
230 V / 50 Hz
Strokes
2,800 / min.
2,800 / min.
Length of cutter blade
48 cm
58 cm
Tooth gap of cutter blade
27 mm 27
mm
Weight
3.7 kg
3.8 kg
Workplace related
sound pressure level L
pA 1)
84 dB (A)
85 dB (A)
Uncertainty K
pA
3 dB (A)
3 dB (A)
Noise emission value L
WA 2)
measured
94 dB (A) /
measured
95 dB (A) /
guaranteed 95 dB (A)
guaranteed 96 dB (A)
Hand / arm vibration a
vhw 1)
< 2.5 m / s
2
Measuring process complying with
1)
EN 774
2)
EU-directive 2000 / 14 / EC. The stated vibration emission value has been measured
according to a standardised test procedure and can be used for comparison of one electric power tool with another. It can also be used
for preliminary evaluation of exposure. The vibration emission value can vary during actual use of the electric power tool.
