Problem
Possible Cause
Remedy
Unit does not start
Extension cable not connected
or damaged.
v
Connect the extension cable
or if necessary replace it.
Blade blocked.
v
Remove obstacle.
Unit can no longer be stopped Start button is stuck.
v
Disconnect the mains cable
and loosen start buttons.
Hedge is not cleanly cut
Blade blunt or damaged.
v
Have blade replaced by
GARDENA Service.
For any other malfunctions please contact the GARDENA service department.
Repairs must only be done by GARDENA service departments or specialist dealers
approved by GARDENA.
6. TECHNICAL DATA
Electric Hedge Trimmer
EasyCut 420/45
(Art. 9830)
EasyCut 450/50
(Art. 9831)
EasyCut 500/55
(Art. 9832)
Motor power consumption
420 W
450 W
500 W
Mains voltage / Mains frequency 230 V / 50 Hz
230 V / 50 Hz
230 V / 50 Hz
Strokes
3,800 /min.
3,800 /min.
3,800 /min.
Length of blade
45 cm
50 cm
55 cm
Tooth gap of blade
18 mm
18 mm
18 mm
Weight
approx. 2.7 kg
approx. 2.8 kg
approx. 2.8 kg
Sound pressure level L
PA
1)
Uncertainty k
PA
84 dB (A)
3 dB (A)
84 dB (A)
3 dB (A)
84 dB (A)
3 dB (A)
Sound power level L
WA
2)
Uncertainty k
WA
measured 94 dB (A)
guaranteed 97 dB (A)
2.04 dB (A)
measured 94 dB (A)
guaranteed 97 dB (A)
2.04 dB (A)
measured 94 dB (A)
guaranteed 97 dB (A)
2.04 dB (A)
Hand / arm vibration a
vhw
1)
Uncertainty k
a
3.8 m/s
2
1.5 m/s²
3.8 m/s
2
1.5 m/s²
3.0 m/s
2
1.5 m/s²
Measuring process complying with
1)
EN 60745-2-15
2)
RL 2000/14/EC amended by 2005/88/EC
The stated vibration emission value has been measured according to a standardized
test procedure and can be used for comparison of one electric power tool with
another. It can also be used for preliminary evaluation of exposure. The vibration
emission value can vary during actual use of the electric power tool.
7. ACCESSORIES
GARDENA Maintenance Oil
Extends the life of the blade.
Art. 2366
8
GB
