Replacing the filament
cassette:
f
f
d
g
k
p
j
l
g
h
Risk of injury!
v
Never use metallic cutting elements or replacement
parts and accessories not provided by GARDENA.
Only use original GARDENA Filament Cassettes. You can
order Replacement Filament Cassettes from your GARDENA
dealer or directly from the GARDENA Customer Service.
• for Art. 9807 EasyCut 400/25:
GARDENA Filament Cassette for Turbotrimmers
Art. 5307
1. Press in cassette cover
d
on the two catches
f
at the same
time and remove.
2. Remove the filament cassette
g
.
3. Remove any dirt.
4. Pull approximately 15 cm of the cutting filament
p
out of the
new filament cassette
g
through the hole in the plastic ring
h
.
5. First thread the cutting filament
p
through the metal sleeve
j
.
6. Thread the cutting filament
p
around the guide pin
k
.
7. Insert the filament cassette
g
into the filament cassette
holder
l
.
8. Fit the cassette cover
d
on the filament cassette holder
l
so that you hear both locking clips
f
click into place.
When fitting the cassette cover
d
, the cutting filament
p
must
be placed around the guide pin
k
and must not be trapped.
v
If the cassette cover
d
cannot be touched down, turn the
filament cassette
g
to and fro, until the filament cassette
g
is completely in the filament cassette holder
l
.
18
GB
