background image

8. Technical Data

Turbotrimmer

ComfortCut 450/25  

(Art. No. 9808)

ComfortCut Plus 500/27 

(Art. No. 9809)

PowertCut Plus 650/30 

(Art. No. 9811)

Motor power consumption

450 W

500 W

650 W

Mains  voltage / mains  frequency 230 V / 50 – 60 Hz

230 V / 50 – 60 Hz

230 V / 50 – 60 Hz

Filament thickness

1.6 mm

1.6 mm

2.0 mm

Cutting width

250 mm

270 mm

300 mm

Filament supply

6 m

6 m

4 m

Filament feed

Tip mechanism

Tip mechanism

Tip mechanism

Rpm of filament cassette

approx. 12,800 rpm approx. 12,200 rpm approx. 10,500 rpm 

(Idle speed 

approx. 9,500 rpm)

Weight

approx. 3.3 kg

approx. 3.3 kg

approx. 3.6 kg

Telescopic adjustment  

of the turn handle

approx. 24 cm

approx. 24 cm

approx. 24 cm

Workplace­related  

emission values L

pa

1)

Uncertainty k

pa

 

84 dB (A)

3 dB (A)

 

83 dB (A)

3 dB (A)

 

83 dB (A)

3 dB (A)

Noise level L

WA

2)

Uncertainty k

WA

measured 93 dB (A) /

guaranteed 94 dB (A)

1 dB (A)

measured 94 dB (A) /

guaranteed 96 dB (A)

2 dB (A)

measured 93 dB (A) /

guaranteed 96 dB (A)

3 dB (A)

Hand / arm  vibration  a

vhw

3)

Uncertainty k

a

< 2.5 m/s

2

1.5 m/s²

< 2.5 m/s

2

1.5 m/s²

< 2.5 m/s

2

1.5 m/s²

Measuring process complying with  

1)

 DIN EN 60335-2-91  

2)

 RL2000/14/EG  

3)

 DIN EN 786. The stated vibration emission value  

has been measured  according to a standardised test procedure and can be used for comparison of one electric power tool with another. 
It can also be used for  preliminary evaluation of exposure. The vibration emission value can vary during actual use of the electric  
power tool.

9.  Service / Warranty

Warranty:

GARDENA guarantees this product for 2 years (from date of 

purchase). This guarantee covers all serious defects of the unit 

that can be proved to be material or manufacturing faults.  

Under warranty we will either replace the unit or repair it free of 

charge if the following conditions apply:
•  The unit must have been handled properly and in keeping with 

the requirements of the operating instructions.

•  Neither the purchaser or a non-authorised third party have 

attempted to repair the unit.

The filament cassette and cassette cover are consumables and 

are not covered by the guarantee.
This manufacturer’s guarantee does not affect the user’s existing 

warranty claims against the dealer / seller.

If you have any problems with this product, please contact  

our Service or return the defective unit together with a short 

description of the problem – in case of guarantee, with a copy  

of the receipt – postage paid to one of the GARDENA Service 

Centres listed on the back of this leaflet.

20

GB

Summary of Contents for ComfortCut Plus 500/27
















Reviews: