Gardena 867 Operating Instructions Download Page 3

4

GARDENA Pressure Sprayer 3 l / 5 l

Translation of the original German operating instructions.

Please read the operating instructions carefully and observe the notes 

given. Use the instructions to familiarise yourself with the Pressure 

Sprayer, its proper use and the notes on safety. For safety reasons, 

children under 16 as well as persons not familiar with these operating 

instructions must not use the Pressure Sprayer. Never operate the 

 product when you are tired, ill or under the influence of alcohol, drugs  

or medicine.

Keep these operating instructions in a safe place.

1. Area of application of your GARDENA Pressure Sprayer

Intended purpose:

The GARDENA Pressure Sprayer is intended for distributing solvent-free 

liquid pesticides

1)

, herbicides

1)

, fertilisers

1)

, window cleaners

1)

, and car 

wax

1)

 in domestic gardens and allotments. It must not be used in public 

places, parks, sport arenas, or in agriculture or forestry.

Compliance with the operating instructions provided by the manu-

facturer is a prerequisite for using the Pressure Sprayer correctly.

1)

  In accordance with the laws governing the use of pesticides and detergents, only authorised 

substances may be used (authorised specialist shop).

Please note:

Due of the risk of physical injury, the GARDENA Pressure Sprayer  

must not be used for spraying substances other than those specified  

by   GARDENA.   

Also, no acids, disinfectants or impregnators, aggressive and solvent-

containing cleaning agents, petrol or spray oil may be  sprayed.  

We recommend that you only use pesticides approved by the BBA 

 (German Federal Biological Research Centre for Agriculture and 

 Forestry). To our knowledge at the time of manufacturing the unit, the 

pesticides approved by the BBA will not damage the materials used to 

construct the Pressure Sprayer.  

When spraying insecticides, herbicides and fungicides or other liquid 

plant protection products, you must comply with all special pre-

cautionary measures specified by the manufacturer of the product you 

are using.

2. Safety instructions

Danger of physical injuries:

Never open the Pressure Sprayer or unscrew the nozzle when the 

 Pressure Sprayer is still pressurised. To prevent injury, never connect 

the Pressure Sprayer to an air-compressor. Before pulling out the  

safety valve 

5

 (Fig. 

A3), the sprayer always has to be placed vertically. 

Before opening the sprayer, always release pressure completely by 

pulling out the safety valve. 

Danger! Small parts could be swallowed during assembly and there  

is a risk of suffocation from the polybag. Keep infants away during 

assembly.
Operation:

Inspect the Pressure Sprayer visually before each use. Never leave your 

Pressure Sprayer unattended or for long periods when full and pres-

surised. Keep the unit out of the reach of children. You are responsible 

for the safety of others. Keep your Pressure Sprayer away from heat 

sources and hot environments. Screw tank cap 

9

 tight by hand (do not 

use any tools) and check the correct fit of the O-ring 

$

 (Fig. 

B1).

Cleaning:

Release the pressure after each use, empty the container, clean it 

 carefully, rinse it with clear water and clean the sieve 

8

. Then leave  

the pressure sprayer open and allow it to dry. Do not dispose of residual 

fluids in the sewerage system (local disposal systems). Always clean  

the Pressure Sprayer before using a different product to avoid chemical 

reactions. If more than one Pressure Sprayer is used, tanks and tank 

caps must not be interchanged.
Storage:

Before storing, loosen the tank cap and always empty your Pressure 

Sprayer completely (also after cleaning with water). Store away from 

frost. If you use the permanent lock 

E

 (Fig. 

B3) pay attention that you 

work very carefully. Never store your pressure sprayer with permanent 

lock.

3. Assembly

A1   Mounting the spray tube 

1

 in the hand valve 

2

.

A2   Attaching the spray hose 

3

 to the hand valve 

2

.

A3   Attaching the spray hose 

3

 to the container cap 

4

.

A4   Assemble shoulder straps 

6

.

A5   Install suction hose 

7

 with sieve 

8

.

4. Operation

Please observe the safety and proportioning instructions provided by the 

manufacturer of the product you are going to spray.
B1   Unscrew tank cap 

9

 and fill tank 

0

WARNING!: The tank may be filled with a maximum of 3 l  

(Art. 867) / 5 l (Art. 869) of liquid.

A3  Pump using the handle 

!

.

B2  Set mist spray via the nozzle 

"

.

B3  Press operating tab 

C

 and spray liquid.

5. Cleaning

Cleaning the Pressure Sprayer:

Always clean your Pressure Sprayer after spraying.

Use Pressure Sprayer only with clear water (possibly with addition of 

dish detergent) and spray empty. The valves, the suction hose 

7

,  

the spray pipe 

1

, the nozzle 

"

 and the sieve 

8

 are cleaned. In the 

case of outer  dirtying of handle and tank, thoroughly clean the area 

thread and thread O-ring 

$

. We recommend that you have your 

 Pressure Sprayer thoroughly inspected (preferably at a GARDENA 

 Service Centre) after using it for 5 years.

6. Trouble-Shooting

C1  Cleaning the sieve:

v

 Open up sieve 

8

 on suction hose 

7

 and clean it.

Problem

Possible Cause

Remedy

Pump does not  

build up pressure.

Safety valve 

5

 is 

loose.

Tighten the safety 

valve 

5

.

Hose connection at 

the container and

hand valve is not tight.

Tighten the hose con-

nections at the con-

tainer and hand valve.

Continuous lock 

E

 

enabled on handle.

Release lock 

E

 on 

handle.

Sealing cap 

F

  dirty /  

defective.

Clean or exchange 

sealing cap 

F

.

Pressure Sprayer 

does not spray 

 although there is 

 sufficient  pressure   

or only sprays with  

a weak spray jet.

Nozzle 

"

 is blocked.

Unscrew nozzle 

"

 

and clean.

Sieve 

8

 on suction 

hose clogged.

Open up sieve 

8

 and 

clean it.

It is difficult to  

open and close the 

container.

Container pressure 

too high.

Release the container 

pressure completely 

by means of the  safety 

valve 

5

.

If you have any other problems with your Pressure Sprayer please 

contact GARDENA Customer Service.

7. Putting into Storage

Storing your Pressure Sprayer:

1. Clean the Pressure Sprayer (refer to 5. Cleaning).

2. Keep your Pressure Sprayer in a place protected from frost.

8. Available accessories

GARDENA Weedkiller Cone    Prevents spray mist from  

blowing away. 

Art. No. 894

GARDENA Extension Lance    For extending the spray  

tube.  

Art. No. 897

9. Technical data

Art. 867 (3 l)

Art. 869 (5 l)

Max. capacity

3 l

5 l

Spray tube length

36 cm

36 cm

Hose length 

175 cm

175 cm

Permissible working  pressure

3 bar

3 bar

Max. permissible  operating 

 temperature

40 °C

40 °C

10. Warranty

GARDENA Manufacturing GmbH guarantees this unit for 2 years (from 

date of purchase). This guarantee covers all serious defects of the unit 

that can be proved to be material or manufacturing faults. Under war-

ranty we will either replace the unit or repair it free of charge if the fol-

lowing conditions apply: The unit must have been handled properly and 

in keeping with the requirements of the operating instructions. Neither 

the purchaser or a non- authorised third party have attempted to repair 

the unit. This manufacturer’s guarantee does not affect the user’s exist-

ing  warranty claims against the dealer / seller.  

If you have problems with this unit, please contact our Service.

GB

Reviews: