11
GB
Cleaning the Fountain Insert :
6. Trouble-shooting
Warning ! Electric shock !
A
V
Please unplug the pump before carrying out
any maintenance works.
1. Remove the pump from the filter block (see
5. Maintenance
).
2. Turn the pump housing
G
anticlockwise and pull it vertically
off the motor housing
H
(Bayonet fastening).
3. Pull the impeller
I
out of the motor housing
H
and clean it.
4. Push the cleaned impeller
I
back into the motor housing
H
.
5. Press the pump housing
G
vertically on to the motor housing
H
and turn it clockwise. (Bayonet fastening).
6. Reassemble the pump into the filter block (see
5. Maintenance
).
Fault
Possible cause
Remedy
No water feature operating
Mains plug not plugged in.
v
Plug in mains plug.
Impeller unit is blocked.
v
Clean pump.
Electronic circuit breaker
v
Stand the pump in the
has been activated.
water.
Reduced water feature
Water feature insert is dirty.
v
Clean water feature insert.
and nozzle pipe.
Filter clogged.
v
Clean filter.
Pump shuts down after
Water temperature too high.
v
Maximum water
a short time
temperature is 35 °C.
If any other faults arise, please contact GARDENA Service.
7. Storing your Fountain Pump Set
The pump should be stored out of the reach of children.
1. Remove the Filter and Fountain Pump from the pond before frost
is expected and clean.
2. To avoid difficulties when starting up in the spring, we recom-
mend storing the pump in a frost-free location in a container
filled with water.
The mains plug must not be submerged.
H
I
G
Cleaning the Pump:
Overwintering :
1. Unscrew fountain insert
3
from the nozzle tube
1
.
2. Wash out the nozzle tube and fountain insert
3
in clean water.
