Gardena 6000, Operating Instructions Manual, Page: 12 / 204

3. Using the Pump for the First Time
13 mm (1/2”)
Hose diameter 15 mm (5/8”) 25 mm (1”) 38 mm (1 1 /
2
”)
19 mm (3/4”)
Hose connection
of universal fitting
햲
Hose connection Cut off topmost Do not cut off any Cut off top two
nipple at
쎻
nipples nipples at
쎻
Connection kits needed 13 mm (1/2”): GARDENA Pump Connection Set, Art. No. 1750
for 13 –19 mm hoses:
15 mm (5/8”): GARDENA Tap Connector, Art. No. (2)902, and
Standard Hose Connector, Art. No. (2)916
19 mm (3/4”): GARDENA Pump Connection Set, Art. No. 1752
Best results in delivery capacity are achieved when using
38 mm (1
1 /
2
”) hoses.
Connecting the hose: The universal fitting
햲
llows connection of all the hoses listed in
the table above.
1. Screw L-piece
햳
into the pump.
2. Cut off nipples of the universal
햲
fitting which are not needed,
to match the hose connection.
3. Screw the universal fitting
햲
onto the pump.
4. Connect the hose to the universal fitting
햲
.
We recommend that 38 mm (1 1 /
2
”)- and 25 mm (1”) hoses should
be fastened with an additional GARDENA hose clamp Art. No.
7193.
Only for 13 mm (1/2”) hose:
The universal fitting
햲
can also be equipped with a GARDENA
Regulator Valve Art. No. 977 so that the contents of the out-
let line do not flow back through the pump after pumping. The
Regulator Valve can be ordered from your GARDENA dealer.
12
GB
쏹 쎻
a
쏹 쎻
a
a
쏹 쎻
b
쏹 쎻
b
쏹 햲
b
쏹 햲
쏹 햳
1777_20.960.07_Tauch_GB 27.07.2011 15:50 Uhr Seite 12