background image

21

GB

7.

Select the minutes for watering duration using the 

-

keys

(e.g. 

20

minutes) and confirm by pressing the 

OK

key. 

24h

flashes. 

Setting the watering cycle / watering days : 

(a) Watering cycle : 

Watering options are every 24 hours 

“24h”

, every second day

“2nd”

, every third day 

“3rd”

, every 

“Odd”

day odd or every

even day 

“Even”

(b) Watering days : 

Every day 

Mo

,

Tu

,

We

,

Th

,

Fr

,

Sa

,

Su

can be individually set. 

8.

(a) Watering cycle : 

Using the 

-

keys, select the desired watering cycle (e.g.

2nd

= every 2nd day) and confirm by pressing the 

OK

key. 

The watering cycle (e.g. 

2nd

) and the preview for the week

(e.g.

Su

,

Tu

,

Th

,

Sa

are shown on the display in frames. 

The days in the preview for the week are always with respect
to the day of the week set in the system (e.g. Sunday 

Su

). 

– or – 

(b) Watering days : 

Using the 

-

keys, select the desired day of the week (e.g.

Mo

= Monday) and select / deselect the day by pressing the

OK

key. 

The selected watering days (e.g.

Mo

,

We

,

Fr

) are shown 

on the display in frames. 

9.

Press the 

Channel

key and set up more watering programs. 

The program is saved and 

SELECT CHANNEL

and the channel

flash (program step 1.). 

10. Press the 

Channel

key. 

The programs have been set up and the main level is 
displayed. 

The main level displays the next programmed watering. In this
example: watering on 2 (

Channel 2 

), watering start time 16 : 30

(

Start Time

16 :30

) on Monday (

Mo

). 

Programming of the Watering Controller is now completed, i.e. the
valves installed open / close entirely automatically and therefore
water at the programmed times. 

You can change an existing program stored in one of the 
3 program memory locations without having to create the 
program from scratch. 

The data for the watering start time, duration, and cycle are preset;
therefore you only need to change the specific values of the wate-
ring program you want to change. You can transfer all other values
from “Setting the watering programs” by pressing the 

OK

key. 

8a) 

8b)

10. 

Changing an existing 
watering program :

7. 

Summary of Contents for 4030


















Reviews: