17
EN
Controls :
Display levels :
The minimum water output to ensure correct
functioning of the Water Computer is 20 - 30 l / h
per outlet. E.g. for controlling the Micro-Drip
System, at least 10 pieces 2-litre Drip Heads
are required.
At high temperatures (over 60 °C at the
display) the LCD display may extinguish.
This does not affect the program in any
way. When the computer cools down the
LCD display illuminates again.
The max. temperature for the water flow is
40 °C.
v
Only use clear fresh water.
The minimum operating pressure is 0.5 bar,
the maximum operating pressure is 12 bar.
Avoid tensile strain.
v
Do not pull the hose connected to the
Water Computer.
Programming
v
Program the Water Computer with the tap
turned off.
In this way, you can prevent unintentional
water penetration.
You can remove the control unit from the
housing to program the Water Computer.
If the controller is removed when the valve
is open, the valve remains open until the
controller is fitted again.
Warning !
This machine produces an electromagnetical
field during operation. This field may under
some circumstances interfere with active or
passive medical implants. To reduce the risk of
serious or fatal injury, we recommend persons
with medical implants to consult their physician
and the medical implant manufacturer before
operating this machine.
Danger !
Small parts could be swallowed during
assembly and there is a risk of suffocation
from the polybag. Keep infants away during
assembly.
3. Function
With the Water Computer, the garden can be watered fully automatically up to 3 times a day
(every 8 hours) via both outlets. Sprinklers, a sprinkler system or a drip head watering system
can be used for watering.
The Water Computer carries out watering fully automatically according to the set program
and can therefore also be used during holidays. Early in the morning or late in the evening,
evaporation and therefore water consumption is lowest.
The watering programme is easily entered using the controls.
Control Function
1
Man. button
For switching the water throughput
on or off manually.
2
OK-Taste
Applies the values set with the
▼
-
▲
buttons.
3
Menu button
Changes to the next programme level.
4
▼
-
▲
buttons
Change the adjustable values in each
(V1 / V2)
level/selection of outlet (V1/ V2) in
Level 1.
The 6 display levels can be selected one after the other by
pressing the
Menu
key.
•
Level 1 :
Normal display
•
Level 2 :
Current time and day of the week
•
Level 3 :
Watering start time
•
Level 4 :
Watering duration
•
Level 5 :
Watering frequency
•
Level 6 :
Switch programme on or off /
Deactivate sensor
4
2
1
3
