background image

17

GB

10. Service / Warranty 

GARDENA guarantees this product for 2 years (from date of 
purchase). This guarantee covers all serious defects of the unit 
that can be proved to be material or manufacturing faults. 

Under warranty we will either replace the unit or repair it free of
charge if the following conditions apply: 

• 

The unit must have been handled properly and in keeping with
the requirements of the operating instructions.

• 

Neither the purchaser or a non-authorised third party have
attempted to repair the unit. 

• 

Faults which occur as a result of incorrectly installed or leaking
batteries are not covered by the guarantee. 

• 

Damage caused by frost is not covered by the warranty. 

This manufacturer’s guarantee does not affect the user’s existing
warranty claims against the dealer / seller. 

If you have any problems with your Water Timer, please con-
tact our Customer Service or return the defective unit together 
with a short description of the problem directly to one of the
GARDENA Service Centres listed on the back of this leaflet. 

All manuals and user guides at all-guides.com

Summary of Contents for 1832-25




















Reviews: