7
6
6. Operating Parts
1
Complete housing
Accompanying accessories
2
Watering cycle control knob
B
G ¾ adaptor for sleeve nut
(Frequency)
C
GARDENA threaded tap
3
Watering time control knob
connector
(Run Time)
4
Key for starting time
(Start Time)
Option
5
Battery compartment
D
Anti-theft protection
6
Control unit connection plug
7
Release button for control unit
8
Connection socket for Soil
Moisture Sensor / Rain Sensor
9
Control knob markings
0
Control unit
A
Sleeve nut
7. Features of the Water Timer
7.1 Operating elements
(Fig. C)
Frequency
To set the
watering cycle.
Run Time
To set the
watering time (Run Time), watering
starting time
and to open and close the
water flow
by hand.
Start Time
▲
▲
The starting time is delayed by an hour from the time
you set the timer, each time you press the key.
7.2 More Functions
Sleeve nut with adaptor
To connect the Water Timer to the tap.
GARDENA threaded tap connector
Fits GARDENA System hoses.
Connection
For GARDENA Soil Moisture Sensor (Art. No. 1187)
and GARDENA Rain Sensor (Art. No. 1189).
Battery compartment
To insert a 9 V battery.
5. Summary of Operating Instructions
1. Insert the battery.
Only use a 9 V alkali-manganese (alkaline) battery type IEC 6LR61.
Check the polarity (+/– markings).
2. Setting the watering
frequency
The following watering cycles
can be selected using the
Frequency
control knob:
3. Setting the watering time / starting time (Run Time)
You can select the watering time using the
Run Time
control knob
3
.
You can select 13 positions between 1 and 120 minutes.
The times you enter are accepted 5 seconds after you have
finished entering the data. The time this happens is the future
watering starting time.
4. Delaying the starting time (Start Time)
The Start Time can be delayed up to 5 seconds after you have selected
the
Run Time.
Each time you press the
Start Time
key
4
, the Start
Time is delayed by 1 hour from the original time set.
5. Manual On / Off operation (Man)
Turning the
Run Time
knob
3
to
On
opens the valve, turning it back
to
Off
or to the required watering time, closes the valve. The starting
time you originally programmed remains unchanged.
6. Reset
Turning the
Run Time
knob
3
to
Reset
deletes the starting time
and watering time. The watering valve is not opened.
7. Bad weather operation (Man / Off)
If
Run Time
3
is set to
Off,
your garden will not be watered automati-
cally. e.g. during a rainy period. If, at the end of the rainy period, you
turn the knob back to the required watering time, the starting time you
selected remains unchanged.
Setting
Watering Cycle
7
th
every 7 days
3
rd
every 3 days
2
nd
every 2 days
24 h
daily
12 h
twice a day
8 h
three times a day
Summary of Contents for 1805
Page 2: ......
