Gardena 15001-26, Operator'S Manual

Page: 24 / 56

SILENO life Area, m
2
Recommended op-
erating time, h
250 3-4
500 7-8
750 12-13
1000 16-17
1250 21-22
3.10.3.4 To copy the schedule setting
1.
Do steps 1–3 in To get access to the menu on
page 23
.
2. Use the arrow buttons and the OK button to move
through the menu structure
Schedule > Advanced
> Overview > Copy .
3. Use the arrow buttons and the OK button to copy
the schedule setting. You can copy the schedule
settings day to day or for the full week.
3.10.3.5 To reset the schedule setting
You can remove all schedule settings and use the
factory setting.
1.
Do steps 1–3 in
To get access to the menu on
page 23
.
2. Use the arrow buttons and the OK button to move
through the menu structure Schedule > Advanced
> Overview > Reset
.
a) Push the arrow buttons to select
Current day
to only reset the current day to factory
settings.
b) Push the arrow buttons to select
All week
to
reset all schedule settings to factory settings.
3. Push the OK button.
3.10.4 SensorControl
SensorControl automatically adjust the cutting time to
the growth of the grass. The product is not permitted to
operate more than the schedule settings.
Note:
When using
SensorControl
, it is recommended
to make as much operating time as possible available
for
SensorControl
. Do not restrict the schedule more
than necessary.
The first operation of the day is set by the schedule
settings. The product always complete 1 mowing cycle,
and then
SensorControl
selects if the product will
continue to operate or not.
Note:
SensorControl
is reset if the product does not
operate for more than 50 hours, or if a Reset of all user
settings
is done.
SensorControl
is not changed if a
Reset of schedule settings is done.
3.10.4.1 To set the SensorControl
1.
Do steps 1–3 in
To get access to the menu on
page 23 .
2. Use the arrow buttons and the OK button to move
through the menu structure SensorControl > Use
SensorControl
.
3. Push the OK button to select the
SensorControl
.
4. Push the BACK button.
3.10.4.2 To set the SensorControl frequency
Set how frequently the product cuts the grass when the
SensorControl is in use. There are 3 frequency levels:
Low, Mid
and
High
. The higher the frequency, the more
sensitive the product is to the grass growth. That is, if
the grass growth is high then the product is allowed to
work longer.
Note:
If the mowing results are not optimal when
using
SensorControl
, the schedule settings may need
adjusting. Do not restrict the schedule more than
necessary. Also, check that the blade disc is clean and
that the blades are in good condition.
1. Do steps 1–3 in
To get access to the menu on
page 23 .
2. Use the arrow buttons and the OK button to move
through the menu structure SensorControl >
Cutting time
.
3. Use the arrow buttons to select
Low, Mid
or
High
frequency.
4. Push the BACK button.
3.10.5 Security level
There are 2 security levels for SILENO city and 3
security levels for SILENO life.
24 - Installation 1298 - 007 - 16.09.2020