2. ASSEMBLY
DANGER! Risk of injury!
Cut injury when the product starts accidentally.
v
Wait for the blade to stop, remove the safety key and use
gloves before you assemble the product.
To assemble the lower handles [ Fig. A1 ]:
1. Push the lower handles
(1)
into the openings in the mower.
Make sure that the handles
(1)
are completely in place and the handle
holes are inline up with the holes in the mower.
2. Put the washer
(2)
on the wing screw
(3)
.
3. Put the wing screw
(3)
in the threaded hole in the mower.
4. Tighten the wing screw
(3)
.
To assemble the upper handle [ Fig. A2 ]:
1. Put the upper handle
(4)
on the lower handles
(1)
.
Make sure that the handles are completely in place and the handle
holes are inline.
2. Push the screws
(5)
through the holes.
3. Put the washers
(2)
and the wing nuts
(6)
on the screws
(5)
.
4. Tighten the wing nuts
(6)
.
To attach the cable to the handle [ Fig. A3 ]:
v
Attach the cable
(7)
to the handle with the clamps
(8)
.
Make sure that the cable is not locked between the lower and the
upper handle.
To assemble the grass box [ Fig. A4 / A5 ]:
1. Turn the cover
(10)
on the grass box.
Make sure that the cover aligns to the grass box.
2. Push the cover
(10)
on the grass box until the connections audibly
engage.
Make sure that all connections are engaged.
3. Push the handle
(11)
on the grass box until the connections audibly
engage.
4. Push the chute
(9)
into the grass box and pull the chute
(9)
forward
until it audibly engages.
3. OPERATION
DANGER! Risk of injury!
Cut injury when the product starts accidentally.
v
Wait for the blade to stop, remove the safety key and use
gloves before you adjust or transport the product.
To charge the battery [ Fig. O1 / O2 / O3 ]:
CAUTION!
v
Note the mains voltage! The voltage of the power source must
match the voltage specified on the rating plate of the charger.
For the GARDENA Battery Mower Art. 14621-55 there is no battery
and no charger in the scope of delivery.
Thanks to the intelligent charging process, the charge condition of the
battery is automatically detected and then charged up with the optimal
charge current depending on battery temperature and voltage.
In this way, the battery is treated with care and remains permanently fully
charged when it is stored in the charger.
1. Open the cover
(18)
.
2. Push the locking buttons
(A)
and remove the batteries
(B)
from the
battery holder
(D)
.
3. Connect the battery charger
(C)
into a mains socket.
4. Slide the battery
(B)
into the charging slot of the battery charger
(C)
.
When the battery charge indicator
(Lc)
at the charger flashes green
the battery is being charged.
When the battery charge indicator
(Lc)
at the charger illuminates
permanently green the battery is completely charged
(Charging time, see 7. TECHNICAL DATA).
5. Examine the charge status regularly while you charge.
6. When the battery
(B)
is completely charged, disconnect the battery
(B)
from the charger
(C)
and charge the second battery.
Meaning of the Indication Elements:
Indication on the charger:
(Fast) Flashing of the
Green Battery Charge
Indicator
(Lc)
The rapid-charging procedure is indicated by
fast flashing
of the
green
battery charge indicator
(Lc)
.
Note:
The rapid-charging procedure is only possible when the battery
temperature is within the allowable charging temperature range,
see 7. TECHNICAL DATA.
(Slow) Flashing of the
Green Battery Charge
Indicator
(Lc)
When the charging condition of the battery is 80 %, the
green
battery
charge indicator
(Lc)
flashes slowly
.
The battery can be removed for immediate use.
Continuous Lighting
of the Green Battery
Charge Indicator
(Lc)
Full
Continuous lighting
of the
green
battery charge indicator
(Lc)
indicates
that the battery is fully charged.
When the battery is not inserted,
continuous lighting
of the battery
charge indicator
(Lc)
indicates that the mains plug is inserted in the
socket outlet and that the battery charger is ready for operation.
Continuous Lighting
of the Red Battery
Error Indicator
(Wc)
Continuous lighting
of the
red
battery error indicator
(Wc)
indicates
that the temperature of the battery is not within the allowable charging
temperature range, see 7. TECHNICAL DATA.
As soon as the allowable charging temperature range is reached, the
battery charger automatically switches to rapid charging.
Flashing Red Battery
Charge Indicator
(Wc)
A
flashing red battery error indicator
(Wc)
indicates a different
malfunction of the charging procedure, see 6. TROUBLESHOOTING.
Battery charge status indication
(P)
on the product [ Fig. O4 / O7 ]:
After starting the product, the battery charge status indication
(P)
is displayed for 5 seconds.
Battery charge status
Battery charge status indication
67 – 100 % charged
(L1)
,
(L2)
and
(L3)
illuminate green
34 – 66 % charged
(L1)
and
(L2)
illuminate green
11 – 33 % charged
(L1)
illuminates green
0 – 10 % charged
(L1)
flashes green
If the LED
(L1)
flashes green, the battery must be charged.
If the error LED
(Wp)
is illuminated or flashing, see 6. TROUBLESHOOTING.
To adjust the cutting height [ Fig. O5 ]:
The cutting height can be adjusted from 20 – 60 mm in 12 positions.
1. Push and turn the adjust wheel
(20)
clockwise to lower the cutting height.
2. Push and turn the adjust wheel
(20)
counterclockwise to increase the
cutting height.
To use the mower with the grass box [ Fig. O6 ]:
DANGER! Risk of injury!
Cut injury when the blade turns or the mower starts
accidentally.
v
Wait for the blade to stop, remove the safety key and use
gloves before you open the protective flap.
v
Do not put your hands in the discharge opening.
1. Lift the protective flap
(21)
.
2. Put the grass box into the mower by the handle
(11)
.
Make sure that the grass box is securely connected.
3. Start the mower.
The level indicator
(22)
opens during mowing. When it closes during
mowing, the grass box is full.
Personal safety
DANGER! Risk of suffocation!
Small parts can be easily swallowed. There is also a risk that the poly-
bag can suffocate toddlers. Keep toddlers away when you assemble the
product.
Do not use the start levers alternately.
Do not disassemble the product further than the delivery status.
Use gloves, wear slip resistant shoes and wear eye protection.
Only start the mower with an upright standed handle.
Do not overload the mower.
Never operate the product when you are tired, ill or under the influence of alcohol,
drugs, or medicine.
EN
11
14621-20.960.01.indd 11
03.11.20 18:21
