6. STORAGE
To put into storage:
The product must be stored away from children.
1. Unplug the Holiday Watering system.
2. Clean the pump and the Holiday Watering system
(see 5. MAINTENANCE).
3. Store the pump and the Holiday Watering system in
a dry, enclosed space which is free of frost.
Disposal:
(in accordance with RL2012/19/EC)
The product must not be disposed of to normal
household waste. It must be disposed of in line with local
environmental regulations.
IMPORTANT!
Dispose of the product through or via your municipal
recycling collection centre.
7. TROUBLESHOOTING
Problem
Possible Cause
Remedy
The system runs after the pump
has been switched off
The drip distributors are positioned
below the water level.
v
Set up the plants above the water
level.
Pump is running but the delivery
drops suddenly
Foot / Filter is clogged.
v
Clean the foot / filter.
The control indicator
(Lc)
on the
plug-in power supply is not
illuminated [ Fig. T1 ]
The power adapter is not plugged in.
v
Plug in the plug-in power supply.
The control indicator
(Lc)
on the
plug-in power supply is illuminated
red [ Fig. T1 ]
Pump is disconnected.
v
Connect the pump to the plug-in
power supply.
The control indicator
(Lc)
on the
plug-in power supply flashes red
at one-second intervals [ Fig. T1 ]
Pump is blocked (overcurrent).
v
Contact the GARDENA Service.
The control indicator
(Lc)
on the
plug-in power supply flashes red
at half-second intervals [ Fig. T1 ]
Container is empty
(dry-running protection).
v
Fill the container with water.
NOTE: For any other malfunctions please contact the GARDENA service department.
Repairs must only be done by GARDENA service departments or specialist dealers approved
by GARDENA.
DANGER! Risk of injury!
Risk of injury when the product starts
accidentally.
v
Disconnect the product from the mains before
you troubleshoot the product.
v
Clean the pump with a damp cloth.
To clean the filter [ Fig. M1 ]:
In order to ensure continuous trouble-free operation, the
filter
(14)
should be cleaned at regular intervals.
1. Push in the two locks
(12)
and pull off the foot
(13)
downwards.
2. Clean the filter
(14)
and the foot
(13)
under running water.
3. Reassemble all parts in reverse order. Make sure that
the two locks
(12)
are correctly engaged.
The pump must not be operated without the filter
(14)
.
Cleaning the Holiday Watering system:
Ensure that the Holiday Watering system’s surface and
contacts are always clean and dry before connecting the
Holiday Watering system.
Do not use running water.
v
Clean the contacts and the plastic parts with a soft and
dry cloth.
EN
13
1265-20.960.02.indb 13
21.02.20 09:05
