Hardware Used
M6 x 36 mm Bolt
x 1
M6 Nut
x 1
AA
AA
AA
FF
3. Adjust the angle of the two legs. Place a leg
crossbar (D) between two of the legs, lining
up the bolt holes. For each hole in the front
legs (B), insert an M8 x 30 mm bolt (CC)
through an M8 washer (II), through the front
leg (B) and into the leg crossbar (D). Don’t
completely tighten. Repeat procedure for
the back leg (C). Repeat procedure for the
crossbar between the other legs.
4. Join the right and left back crossbars (F & E)
in the center and insert an M6 x 36 mm
bolt (AA) through the two back crossbars
(F & E), through an M6 washer (HH) and an
M6 nut (FF). Do not completely tighten.
ASSEMBLY INSTRUCTIONS
3
Hardware Used
M8 x 30 mm Bolt
x 8
M8 Washer
x 8
AA
CC
AA
II
4
2
A
DD
II
II
GG
C
B
2. Align the two holes at one end of top frame
bar (A) with the two holes in the top of the
front leg (B) and the two holes in the top
of the rear leg (C) on the other side. Insert
an M8 x 63 mm bolt (DD) through an M8
washer (II), through the front leg (B), top
frame (A), the rear leg (C), through another
washer (II) and into an M8 nut (GG) for
each hole. Don’t completely tighten.
Repeat procedure on the other side of the
frame.
Hardware Used
M8 x 63 mm Bolt
x 4
M8 Nut
x 4
AA
DD
AA
GG
x 8
AA
II
B
C
D
CC
II
M8 Washer
AA
HH
M6 Washer
x 1
5
FF
HH
E
F
AA
Lowes.com/gardentreasures
