3
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time:
3 minutes
No tools required for assembly.
1. Top finial (A) is pre-assembled by factory.
Insert the lower pole (C) into umbrella base
(sold separately). Use a heavy or weighted
base to help stabilize the umbrella. Securely
fasten the lower pole (C) to the umbrella
base.
Hold the upper part of the umbrella (B)
upside down and shake gently, allowing it to
fall naturally into the open position. Slowly
crank the handle until the cord slack is taken
up.
Turn the umbrella upright and insert the
upper part of the umbrella (B) into the lower
pole (C). The push button located on the
upper part of the umbrella (B) must extend
through the opening on the lower pole (C).
You may now crank the umbrella to its fully
opened position.
ASSEMBLY INSTRUCTIONS
CARE AND MAINTENANCE
SAFETY INFORMATION
• Assemble on a soft, non-abrasive surface.
• Two adults may be required for safe assembly.
• Do not leave the umbrella open during high winds. Crank the umbrella to its closed position
during windy conditions.
• When not in use, keep the umbrella closed.
• Clean with mild soap and lukewarm water, rinse, and air dry.
• Store the product indoors in a cool, dry place.
1
A
B
C
