13
KEEPING THE AIR FILTER CLEAN
STEPS FOR CLEANING RING STYLE FOAM AIR FILTER (SEE PARTS DRAWING ON PAGE 13)
1.
Wash in warm water with liquid detergent un
til d
irt and debris are removed. Press or squeeze
fi
lter when cleaning...
DO NOT TWIST
2.
Rinse
fi
lter un
til de
tergent and dirt are removed
3.
Dry
fi
lter by wrapping in dry cloth and pressing un
til
water is removed
4.
Apply lightweight motor oil or thin based machine oil to en
ti
re
fi
lter
5.
Remove excess oil
6.
Rea
tt
a
ch fi
lter and cover to unit
STEPS FOR CLEANING BLOCK STYLE FOAM AIR FILTER (SEE PARTS DRAWING ON PAGE 22)
1.
Before removing the Air Filter Cover, move the Choke Lever to the Choke Po
siti
on (See Fig 1)
2.
Squeeze the latch tabs on both sides of the Air Filter Cover to remove the cover (See Fig 2)
3.
Once you have released the cover, rotate the cover away from the engine (See Fig 3)
4.
Remove the Foam Air Filter (See Fig 4 & 5)
5.
Replace Filter with new oiled Filter or clean the original Filter by following the same steps as cleaning the Ring
style
filte
r above
6.
Reinstall the Filter by pressing it into posi
ti
on. Make sure the foam seals the air intake valve (See Fig 6)
7.
Snap Air Filter Cover back in place. Check to ensure cover is securely in place. To check, pull on cover. If cover
does not move, then it is secure
FIGURE 3
FIGURE 4
FIGURE 1
FIGURE 2
FIGURE 5
FIGURE 6
MODEL Y2007
MINI CULTIVATOR AND DETHATHER
