5
Assembly
Step 1 – Attach Cast iron Assembly to Base
Step 2 – Attach Burner Assembly to Tank Housing
Step 3 – Emitter screen Assembly
Take out all the parts of the Tabletop Heater.
Aim the Cast iron at the Base holes.
Use 4pcs M6X15mm bolts and fix the Tank housing
to the Base & Cast iron.
Tighten the bolts as above show.
Put the Burner on the Tank Housing then fix them with
4pcs 3/16” bolts.
Fix the Regulator to the Tank Housing with each one of
the M5X10mm bolt & M5 nut.
Fix 3pcs pins of 60mm length to the Emitter screen with 3pcs
M5 nuts then tighten them.
Put the Emitter screen on the Burner. Use 4pcs 3/16” bolts to
connect the Emitter screen to the Burner.Tighten the bolts.
