Align the connector of the assembled
rocker seat with the hole in center post
and push the rocker seat down firmly
until fully engaged. See Fig. 5.
Place the rocker base (E) on a flat surface,
and insert the center post (F) into the
hole located at the center of the base (E).
See Fig. 4. Push the center post (F)
down firmly and twist it left and right
as necessary.
Repeat procedure for the other rocker.
Fig. 5
Fig. 4
4
Fig. 6
4
5
6
SLING CHAIR ASSEMBLY
7
Attach the sling seat and back (B) to the
chair frame (A)
．
Align the holes, from
outside insert a long bolt (Gc) through a
small metal washer (Gd), through the front
crossbar of chair frame (A), through the
crossbar of sling seat and back (B),
through another small metal washer (Gd) and
secure with a small nut (Gg). See Fig. 6. Do
not tighten completely. Repeat procedure
for the other side.
Gg
Gd
A
Gd
Gc
B
A
E
F
