Step1:
Place the table rim upside down on a flat,soft surface .Attach table legs to table rim by inserting bolts (M6x15)
with metal washers through the pre-drilled holes in the table rim and legs. (DO NOT TIGHTEN COM-
PLETELY!)
Step 2:
Attach the leg connector bracket to the table legs by inserting bolts (M6x25) with metal washers through the
pre-drilled holes in the leg connector bracket and legs.Tighten all the bolts completely and cover them with
plastic bolt caps.
Important note:Each bolt should be tightened a few revolutions at a time,alternating between bolts in a cross
corner(X)pattern,this will ensure your table is level by placing equal pressure on all bolt joints.
ASSEMBLY INSTRUCTIONS
Identify all parts packed in the carton against the parts list. Remove all protective materials. Place parts on a nonabrasive
surface to avoid scratching. If you have any questions, please call our Customer Service Center at 800-866-9330, (fax:
417-626-0906),Monday-Friday,9:00a.m.-5:00p.m. CST , e-mail: [email protected] or visit our website at
www.summercasual.com.
Step 3:
With the help of another person,turn the table in the upright position,Place the glass into the table rim. Your
table is now ready for use.
See our extensive assortment of outdoor living products
on-line at www.sears.com and www.kmart.com
Made in / Hech en CHINA
Distributed by Sears, Roebuck and Co., Hoffman Estates, IL 60179
sears.com
For questions or comments about product:
Email:
or Call toll-free:800-866-9330
Please refer to part numbers when reordering
3 OF 3
