9
3.
The charger will stop charging once the battery is fully charged (after
approximately 3-5 hours). Press the red button
on the battery to check the current charge
level. Switch off the power source and remove
the battery from the charger.
4.
The charger may become warm when
charging; this is normal and does not indicate
a fault with the charger.
Instructions for use
1.
Make sure that the battery is fully charged.
2.
Check that the machine is in good condition, air vents are clear, and
blades are debris free and lubricated.
3.
Place the shoulder strap over your shoulder and lift the machine, make
sure that you feel comfortable holding it before you switch it on.
4.
Switch the machine on by pressing the main switch then squeeze the
handle to start cutting.
5.
When you let go of the handle the machine will stop.
6.
Always hold the product by the handles. Keep the handles dry to
ensure safe support.
7.
Do not over work yourself. Take regular breaks to ensure you can
concentrate on the work and you have full control over the product.
8.
When cutting wide hedges, cut in several stages, moving the blade in
a sweeping motion. For optimum cutting performance tilt the blade
slightly downwards.
9.
Do not allow the machine to overheat. If it does, switch it off for at least
30 minutes and allow to cool.
10.
To prolong the life of the blade and motor, a small amount of 3 in 1 oil
can be used to lubricate.
To purchase a spare 20V battery please contact our dedicated customer
service team on 0871 911 7031* and quote the code
G1168
. Alternatively, visit
our website
www.gardengearonline.co.uk
Care and maintenance
Carry out the following maintenance and cleaning work regularly this will
extend the effectiveness of your purchase.
•
Before each use check the hedge trimmer for any obvious defects
such as loose worn or damaged parts.
