7
2.
Insert the battery into its location on the bottom of the handle. Slide it
into place in the direction shown. You will hear a click when it locks into
place.
Instructions for use
1.
Choose a dry day and preferably when leaves have had a chance to
dry out. Using a rake to turn the leaves the day before you intend to
clear them is recommended as this helps them to dry on both sides.
2.
Stand upright and hold the blower, using the handle.
3.
Keep the blower approximately 10-15cm off the ground and aim it at
the leaves.
4.
Turn the power switch on and move the leaves towards a chosen point
on a flat surface. Swing the blower from left to right to get a better
coverage.
To charge the battery
Take the battery out of the leaf blower by pressing the release button.
Insert the battery into the charger and plug the charger electric cable into a
power socket. The red light on the charger will turn on to indicate charging is
underway.
The charger will stop charging once the battery is fully charged (after
approximately 3-5 hours). The green lights will come on when the battery is
charged. Once fully charged, switch off the power source and remove the
battery from the charger.
The charger may become warm when charging, this is normal and does not
indicate a fault with the charger.