Garden Furniture Direct Keswick bench Assembly Instructions Download Page 3

Page: 3 / 4

Keswick

bench

Step 5

Step 6

Position the cross brace as shown above, ready to be
bolted to the seat assembly...

... using a washer and locknut on each bolt to loosely
attach it to the End frame.

Step 7

Step 8

Ensure that the cross brace is centrally aligned on the
seat panel...

...before securing in place with a 50mm coach screw.

Summary of Contents for Keswick bench

Page 2: ...the table top upside down on a clean flat surface taking care not to damage it Step 3 Step 4 Place one of the End frames centrally against the fixing batten ensuring that the gap at the seat edge is the same on both sides Now using 2 of the supplied 70mm coach screws and the pre drilled holes secure the End frame to the fixing batten on the seat panel ...

Page 3: ...shown above ready to be bolted to the seat assembly using a washer and locknut on each bolt to loosely attach it to the End frame Step 7 Step 8 Ensure that the cross brace is centrally aligned on the seat panel before securing in place with a 50mm coach screw ...

Page 4: ...ds Your Keswick bench is now complete GardenFurniture Direct is a trading style of LTK Scott Limited Registered in England Wales Registered No 6282947 We hope that you found your product quick and easy to assemble However if you require any further assistance or have any questions you can contact us by telephone on 03333 448 121 or visit www gardenfurniture direct ...