background image

Ambleside

 disabled access picnic bench 

4

Step 9 

Step 10 

Now turn the bench assembly right side up ready to 
attach the seats. 

Line up the short seat panel as shown and attach to 
the A-frame with 2 coach screws in each end. 

Step 11 

Step 12 

Line up the longer seat panel in the same way as step 
10 and attach to the A-frame with 2 coach screws in 
each end plus a further 2 screws to attach it to the 
central A-frame as shown above. 

Finally, cover any exposed coach screw heads 
with the cover caps provided. Your 

Ambleside

 

disabled access picnic bench is now complete. 

GardenFurniture.Direct is a trading style of LTK Scott Limited

Registered in England & Wales - Registered No. 6282947

We hope that you found your product quick and easy to assemble. 

However, if you require any further assistance or have any questions you can 

contact us by telephone on: 

03333 448 121

or visit 

www.gardenfurniture.direct

Summary of Contents for Ambleside disabled access picnic bench

Page 1: ...s on the final page of these instructions We highly recommend that any assembly is carried out on a flat level surface if possible and that you use another person to assist you if necessary Tools required Package contents 1 x Table top 2 x Seats 3 x Table A frames 2 x Cross braces 20 x M8 Coach screws Cover caps 10mm socket or spanner The Ambleside disabled access picnic bench Ga Garden rniture Fu...

Page 2: ... fixings Lay the table top upside down on a clean flat surface taking care not to damage it Step 3 Step 4 Place one of the table A frames centrally against the fixing batten ensuring that the gap at the table edge is the same on both sides Using 2 of the supplied coach screws and the pre drilled holes secure the table A frame to the fixing batten on the table top ...

Page 3: ...n Position one of the braces as shown ensuring that it is aligned centrally along the table top and that it is flush with the A frame before proceeding to step 7 Step 7 Step 8 Secure the brace to the A frame using one of the coach screws and secure the other end to the table top as shown in step 6 Repeat steps 6 7 for the other end of the bench so that both braces are connected ...

Page 4: ...ach end plus a further 2 screws to attach it to the central A frame as shown above Finally cover any exposed coach screw heads with the cover caps provided Your Ambleside disabled access picnic bench is now complete GardenFurniture Direct is a trading style of LTK Scott Limited Registered in England Wales Registered No 6282947 We hope that you found your product quick and easy to assemble However ...

Reviews: