Product ID 820.2170 / Instruction ID 445.35.30
Updated 11/19/19
Bowers Forest Products / PO Box 589 / Beavercreek, OR 97004 / Cust. Serv. 503-631-4408
HERITAGE PERGOLA ARBOR
REVIEW ALL STEPS BEFORE STARTING ASSEMBLY
HARDWARE LIST
PRELIMINARIES
TOOLS REQUIRED
ASSEMBLED PRODUCT
PARTS LIST
Quantity
1¼” Screw
(30)
2½” Screw
(4)
Drill bit (if other than
Phillips head)
Spacer block
•
Power screwdriver or drill
•
Tape measure
Handy to have:
•
Level
•
Carpenter’s square
•
Stool or short ladder
•
Bit holder may be needed if using a drill with a
quick-change chuck
Selecting a Work Area
Select an area close to where the arbor will be installed.
The assembly area should be relatively flat and open, at
least 9’x7’. A lawn, driveway or wide path will be
satisfactory. It is a good idea to lay out the arbor box on
your work surface to protect the arbor from nicks and
scratches. Two people are required for the assembly
process. Always use caution when assembling or moving
the arbor.
Optional Painting or Staining
If you wish to stain or paint your arbor, we recommend
applying to individual components before assembly to
ensure fullest coverage. Use a high quality exterior stain or
paint. Be careful not to cover up guide marks on arches.
A
B
HA
C
D
ASSEMBLY INSTRUCTIONS
.
1
3
2
3
4
1
2
3
4
Header
Side Panel
Cap
Brace
.
.
.
.
