PP420 LED lighting controllers - User Manual
1
Getting started
This user manual describes the setting up and operation of the PP420
lighting controllers.
The PP420 is a four channel lighting controller that provides 2 Amps
continuously or 10 Amps pulsed. The controller is also available in a fast
pulsing variant that is identified by the 'F' suffix (refer to
).
Read
(or
, or
)
and
Section 12, Reference information
, and check the PP420 fulfils your
requirements.
Mount the PP420 as described in
, using a
DIN rail or the mounting holes. In particular, read the notes on heatsinking
in
.
Connect the PP420 up to a supply and an LED lighting unit as described in
Refer to xxx to set the PP420 up from its web pages. The commands that
may be used with the Ethernet connection are described in
For additional information on the use of the PP420. Visit
to download a range of Application Notes.
—
5
—
