GARANT XTRIC 363000 80M, Instruction Manual

Page: 27 / 116

en
9. Cleaning
NOTICE
Cleaning with compressed air
If compressed air is used for cleaning there is a risk that metal chips may be blown into the thread
and slots.
» Do not use compressed air to clean clamping devices.
Do not use chemical, alcoholic, abrasive or solvent-based cleaning agents. Use a cleaning cloth to
clean the centring vice.
10. Storage
When putting away the centring vice, take care not to damage the base body or projecting com-
ponents. Place the centring vice on an underlay of wood, rubber or plastic. Before prolonged stor-
age, thoroughly clean the centring vice and apply preservative to it (see
Grease the spindle [
}
26]
and Grease the guides [
}
26] ) and protect it with a cover against dust and coarse dirt.
11. Disposal
Comply with the national and regional environmental protection and disposal regulations for cor-
rect disposal or recycling. Segregate items into metals, non-metals, composite materials and con-
sumables and dispose of them responsibly.
12. Spare parts
Use only original spare parts and wearing parts.
13. Technical data
13.1. CENTRING VICE
Size 80S 80SP 80M 80MP
Width in mm 80 80 80 80
Length in mm 170 170 220 220
Height in mm 40 40 40 40
Pivot angle in ° - ± 2 - ± 2
Weight in kg 3.240 3.228 3.942 3.930
Clamping force max. in kN 25 25 25 25
Torque max. in Nm 85 85 85 85
www.hoffmann-group.com 27