15
3.
Hook one of the carabiners into the next available hole on the same side of the track
where the cable comes off the lifter, and where the DC cable plug comes out of the
lifter.
4.
Install the second lifter by aligning the holes on the MyLifter bracket with the holes
on the Smart Track with the cable approximately lined up with the starting point
that is aligned with the front of your Universal XL HD Frame.
5.
Insert the included spring pins all the way through the holes in the MyLifter bracket
and the Smart Track.
6.
Hook the other carabiner into the next available hole on the same side of the track
where the cable comes off the lifter, and where the DC cable plug comes out of the
lifter.
7.
Plug in one end of each DC Power Cable into the Garage Smart Power Adapter
units.
8.
Install the power adapters anywhere on the Smart Track. The universal mount
attached to the bottom of the power adapters lets you easily slide and snap them
into place on the track.
9.
Plug the other end of the DC Power Cables into the MyLifter units.
10.
Plug the three pronged cables from the power adapters into the nearest outlet.
NOTICE
You can “daisy-chain” the power adapters by plugging the three pronged cable
from one adapter into a second adapter. Then, plug the three pronged power
cable from the second adapter into the nearest outlet.
