=
150
=
=
150
=
=
=
150
150
10 Installation and operating instructions
6.
Installation
6.5
Caution!
To avoid injuries, the tracks must be secured against falling.
To achieve sufficient stability, at least four fixing brackets must be installed per track (this number must be increased
accordingly for longer tracks).
To avoid damage to the upper tracks, the tracks must not tilt when brought together.
6.2
Mounting the upper track
• For each fixing bracket (A) place two screws in the grooves (B)
of the upper track (C).
• Screw the fixing brackets (A) by hand to the upper tracks (C).
A
B
B
C
6.6
A
• Position the fixing brackets (A) on the upper tracks (C).
• Align the fixing brackets (A) with the upper tracks (C).
• Tighten the screws.
C
A
6.7
• Place the upper corner deflection unit (D) in the upper track (C).
• Align the upper track (C) with the corner deflection unit (D)
flush to the wall.
• Align the upper track (C) on the lintel using the closing edge
rail (E).
• Secure the position of the upper track (C) with struts.
D
E
C
E
Check:
If the corner deflection unit is located closely
against the wall, the upper track must end at
least flush with the door opening.
M8x16
www.thegaragedoorcentre.co.uk
0800 525 442
www.thegaragedoorcentre.co.uk
www.thegaragedoorcentre.co.uk
0800 525 442
www.thegaragedoorcentre.co.uk