2/2
3
The fixing bracket must be fixed inside the box or on the awning
frame so that the roller tube is perfectly horizontal and at a
height not less than 1,8m.
4
[FOR XQ50]
Place the motor square pin on the bracket and
the cap at the opposite end of the tube on the fixing plate.
WARNING: Never hit on the head of the motor (D) when you
insert it into the tube.
F
90°
min 1,8
m
C
D
NOTES
• For the XQ50, with torque up to 15Nm, the minimum tube diameter is 50x1,5mm;
for motors with higher torques, the minimum tube diameter is 60x1,5mm.
• For the XQ60, the minimum tube diameter is 63x1,5mm.
WARNING:
• The screws used to fix the last slat on the tube may be too long and reach the
tubular part of the motor. Use appropriate screws or fixing clips.
• Motor moving parts installed under 2,5m from the ground must be protected.
• A wrong motor installation can damage persons or objects.
INSTALLATION
