4
Operation Instruction
Network Video Recorder(NVR)
Quick Start Guide
10
Issue V1.0 (2016-02-22)
Figure 4-2
Rear panel
Table 4-2
Elements of the real panel
NO.
Name
Description
1
PoE network interface
8 PoE network interfaces
2
LAN
RJ45 10 /100 Mbps adaptive Ethernet interface
3
LINE OUT/LINE IN
Audio output and audio input
4
RESET
Factory reset button
5
VGA
Video output interface
6
HDMI
4.3 Startup
Before starting the NVR, ensure that the NVR is connected to a power supply.
When the NVR is connected to a power supply, it starts automatically upon the initial
power-on.
Before starting the NVR, ensure that the NVR is connected to a power supply
properly and a monitor is connected to the HDMI or VGA interface of the NVR
correctly.
The NVR may not operate normally when a power supply exception occurs.
Damage to the NVR would possibly occur in extreme situations. To avoid this, the
user is advised to use a regulated power supply.
When the NVR is started, the power indicator becomes steady on and the NVR starts a
self-test and displays the test result on the screen. The startup process takes about 2
minutes.
When all the hardware abnormality is detected, the self-test screen stays on. You can
click
continue
or
shutdown
in the lower right corner of the screen. If you click
continue
, the NVR enters the login screen.
