2010/2
‐
1
5
Advanced setup (ZNS-GIT IPAdmin Tool)
ZNS
‐
GIT
IPAdminTool
is
a
utility
program
for
IP
products.
Following
list
shows
a
part
of
features
that
ZNS
‐
GIT
IPAdmin
Tool
provides.
z
Configure
IP
address,
Subnet
mask
and
Gateway
z
Shows
network
related
information
such
as
MAC
address
z
Updates
firmware
z
Reboots
the
device
ZNS
‐
GIT
IPAdmin
Tool
is
provided
with
SDK
at
the
following
SDK
path.
{SDK root}\BIN\TOOLS\AdminTool\
Rebooting
Reset
can
be
carried
out
as
follows:
1.
While
the
device
is
in
use,
press
and
hold
the
Reset.
2.
Release
the
Reset
button
after
3
seconds.
3.
Wait
for
the
system
to
reboot.
Resetting to the Factory Default Settings
This
will
reset
all
parameters,
including
the
IP
address,
to
the
Factory
Default
initialization.
To
perform
the
Factory
Default
settings:
1.
Disconnect
the
power
supply
from
the
device.
2.
Connect
the
power
to
the
device
with
the
Reset
button
pressed
and
held.
3.
Release
the
Reset
button
after
5
seconds.
4.
Wait
for
the
system
to
reboot.
More Information
To
learn
more
about
using
other
features
of
your
devices,
refer
to
the
manual,
which
is
available
on
the
SDK
at
the
following
path.
{SDK root}\DOC\
