Ganz ZN-PTZ500VPE, Manual

Page: 11 / 25

IPE5500 OSD Menu Control Manual
2010.5 ‐ 1 03A.00 11
7. Motion Setup
Setup the general functions of Pan/Tilt motions.
z
Motion Lock [ON/OFF]
If Motion Lock is set to ON, it is impossible to set up and delete Preset,
Swing, Pattern and Group. It is possible only to run those functions. To
set up and delete those functions, enter into OSD menu.
z
Power Up Action [ON/OFF]
Refer to “Other Functions" section.
z
Auto Flip [ON/OFF]
Refer to “Other Functions" section.
z
Jog Max Speed
[1
°
/sec ~360
°
/sec]
Sets maximum jog speed. Jog speed is inversely proportional to zoom
magnification. As zoom magnification goes up, pan/tilt speed goes
down.
z
Jog Direction [INVERSE/NORMAL]
If you set this to ‘Inverse’, the view in the screen is moving same
direction with jog tilting. If ‘Normal’ is selected, the view in the screen
is moving reversely.
MOTION SETUP
------------------------
MOTION LOCK OFF
PWR UP ACTION ON
AUTO FLIP ON
JOG MAX SPEED 120/SEC
JOG DIRECTION INVERSE
FRZ IN PRESET OFF
<PARKING ACTION SETUP>
<ALARM INPUT SETUP>
BACK
EXIT