PixelPro GXi Series
ZN-PTZ202XE-XT Installation Guide
03-2014-D
9
5. CONNECTIONS
①
Audio connection
The camera provides a mono audio input and output. Due to low audio output power, an
amplified speaker is recommended for enhanced sound (Refrain from connecting a headphone
or an earphone directly to the camera).
②
Sensor (DI) connection
Sensor (DI) can be connected to either a voltage type sensor or a relay type sensor like the
following figures. The interface type can be controlled by web user interface.
Refer to the provided “
PixelPro GXi series Web Page User's Manual”
for more details.
Input voltage range: 0VDC minimum to 5VDC maximum, Max 50mA
Caution
!
Before connecting sensors, check driving voltage and output signal type of the
sensor. Since the connection is different according to sensor type, be careful to
connect the sensor.
Do not exceed the maximum input voltage or relay rate.
Name
Descriptions
IN4
Alarm Signal Input 4
IN3
Alarm Signal Input 3
GND
Ground
IN2
Alarm Signal Input 2
IN1
Alarm Signal Input 1
GND
Ground
485+
Reserved
485-
Reserved
Top View
②
③
⑤
* Models and their appearance are subject to change without any prior notice.
④
①
⑥
