NVC/IPE Series Installation Guide
IPE5510 Installation Guide
01A.02
7
①
Micro SD Card Socket
It is a memory card slot for external storage.
②
LAN Connector (Ethernet)
This is a RJ45 LAN connector for 10/100 Base-T Ethernet.
This LED lights up as orange and turns green when the encoder is powered on.
LED operation setting:
For the factory default setting, LED 2 blinks for the heartbeat and LED 1 turns on for video
signal. To change its setting, refer to the section
4.5.11. LED Setting
of the
NVC Web Page
User’s Manual.
③
8 pin terminal block for audio, DI, and DO
Refer to the section “
5.1.Connectors”
for more specific information.
④
6 pin connector for analog video output, RS485, and power
Refer to the section “
5.1.Connectors”
for more specific information.
⑤
Reset
Reset switch is used for restarting the camera or resetting it to Factory Default (FD). Refer to
the section “
6.3. Reset”
for more specific information.
LED1 LED2
Summary of Contents for ZN-PTZ12VN-XT
Page 1: ......
