19
ENG-
Alarm settings
Ù
Alarm e-mail
Alarm statuses can also be documented by e-mail as an alternative to automatic connection
on alarm. A receiver who does not have a video reception device can thus also be informed. In
this case, an e-mail with an attached JPEG image is sent to a predetermined e-mail address.
Send alarm e-mail:
select
On
to send an alarm e-mail in the event of an alarm.
Mailserver IP address:
to enable the VCS device to send an e-mail to this address a
Mailserver IP address must be entered that works with SMTP
(Simple Mail Transfer Protocol) e-mail standard. Outgoing e-mails
are transmitted via this address to the mail server. Otherwise the
field may be left blank (0.0.0.0).
Alarm e-mail layout:
you can choose the format for sending an alarm message
:
Standard:
e-mail with attached JPEG picture
SMS:
e-mail only text.
If the receiver is a mobile phone, you need to ensure that its e-mail function is
activated so that this kind of messages can be received.
Alarm e-mail address:
enter the e-mail address for the alarm e-mails.
Alarm e-mail from address:
enter here a unique name for the e-mail sender to facilitate
identification of the e-mail’s derivation.
Alarm e-mail reply address:
enter an e-mail address here if the device is to use this entry
in the 'Reply-to' field when sending e-mail.
Send e-mail for testing:
click on the button
Send now!
to check correct working of
the e-mail.
