5
1.
Alarm / Audio IO (
8 pin Terminal connector)
Audio in
Audio in (line level), for line-in mono signal (only the left channel is used
from a stereo signal)
Audio out
The Audio output (line level), which could be connected to a public address
(PA) system or an active speaker with a built-in amplifier. A pair of
headphones could also be attached.
Alarm in
One digital photo-coupled input
Alarm out
One digital photo-coupled output (200mA)
2.
VIDEO OUT
Analog video output
3.
MICRO SD CARD
Save still shot on Micro SD card.
4. Network connector
The GANZ ZN-Cx connects to the network via a standard network cable, and
automatically detects the speed of the local network segment
(10BaseT/100BaseTX Ethernet). This socket could also be used to power the
GANZ ZN-Cx via Power over Ethernet (PoE). The camera also negotiates the
correct power level while using PoE. (Class 2)
5. Factory default/Control button
Press this button to install the camera using the GANZ Internet Dynamic DNS
(DDNS) Service, or to restore the camera to its factory default settings, as
described.
