01A.01
16
6.2.2. View video using IP address
View the live video on a web page using your IP device and its IP address. To have the correct
IP address ready and use it on a web page:
1.
Convert a MAC address to an IP address or check the IP address on the IPAdminTool. Refer to
Appendix (D): Hexadecimal-Decimal Conversion Table
.
(The MAC address is attached on the side or bottom of the device.)
2.
Open a web browser and enter the IP address of the device.
3.
Click
pop-up blocked
and install the ActiveX setup.exe by clicking the
Run
or
Save
button.
You need to install the ActiveX for displaying the images.
4.
Follow the instructions of the dialog boxes and complete the installation. Then the live video
is displayed on the main page of the web browser.
6.3. Reset
1.
While the device is in use, press the Reset button.
2.
Wait for the system to reboot.
6.4. Factory Default
1.
Press reset button and hold.
2.
Release the Reset button after 5 seconds until LED blinks.
3.
Wait for the system to reboot.
The factory default settings can be inferred as follows:
IP address:
192.168.xx.yy
Network mask:
255.255.0.0
Gateway:
192.168.0.1
User ID:
root
Password:
pass
MAC address = 00-13-23-01-14-B1 → IP address = 192.168.20.177
Convert the Hexadecimal number to Decimal number.
ZN-BT662XE-MIR Installation Guide
