Ganz ZN-B1MTP, User Manual

Page: 7 / 50

PixelPro Series
ZN-BxMTP Series
User’s Manual
10-2014-A
7
1. Network connector
The GANZ PixelPro connects to the network via a standard network cable, and
automatically detects the speed of the local network segment (10BaseT/100BaseTX
Ethernet). This socket could also be used to power the GANZ PixelPro via Power over
Ethernet (PoE). The camera auto-senses the correct power level when using a PoE
switch, router or injector.
When you use a built-in Heater on the camera, particularly you don
’t need connect the
PoE power to the camera. Camera need to connect 24VAC power.
2. Power Connector
24VAC power connector
Note: Heater function is required 24VAC power supply.
When 24VAC power connected to the camera, particularly you
don’t need connect
PoE power.
Note: Heater will be turned-on/off automatically in low ambient temperatures.
3. I/O connector
Audio in
Audio in (line level), for line-in mono signal (only left channel is used from a stereo
signal)
Audio out
The Audio output (line level), which could be connected to a line output of a
microphone system or an active speaker with a built-in amplifier.
Alarm in
One analog (dry contact) alarm input