Ganz ZC-PT218, User Manual

Page: 36 / 52

User’s Manual
35
Speed 6
65 50
Speed 7
75 58
Speed 8
185 185
Speed 9
205 210
Speed 10
225 240
Speed 11
250 275
Speed 12
280 305
Speed 13
320 335
Speed 14
365 365
Speed 15
400 400
•
DWELL TIME
The DWELL TIME is the duration for which the PTZ camera will remain at a
sequence point and has a range from <0> to <127> seconds. The PTZ
camera will move to the next sequence point when the DWELL TIME has
expired. If the setting is <0>, the PTZ camera will remain at the sequence
point until it is manually moved by the user.
•
RUN SEQUENCE
The user can command the PTZ camera to run the selected sequence line
manually.
•
EXIT
Select this option to exit the SEQUENCE menu.
3.3.15 AUTOPAN
Auto-pan refers to a PTZ camera rotating or scanning in a side-to-side motion to
view an area horizontally. The parameters can be set on this page.
•
AUTOPAN LINE
The PTZ camera has eight built-in sets of auto-pan lines. The user can select
a line to execute using the LEFT/RIGHT direction keys. The user can
command the PTZ camera to perform continuous panning with no time limit by
setting an identical start and end point.
AUTOPAN
AUTOPAN LINE 1
START POINT TO FIND
END POINT TO FIND
DIRECTION RIGHT
SPEED
1
RUN AUTOPAN ENTER
EXIT YES