Ganz ZC-NX270P, Instruction Manual

Page: 11 / 12

EG-11
WDR type
Digital Day/Night model True Day/Night model
Model No. ZC-YXW270P ZC-YXW270PE ZC-YXW270PU ZC-NXW270P ZC-NXW270PE
TV system PAL
Scanning system 2:1 Interlace
Image sensor 1/3-type Interline transfer CCD
Effective pixels 976 (H) × 582 (V)
Scanning frequency 15.625kHz (H) / 50.0Hz (V)
Video output 1.0V (p-p)/75
Ω
BNC 1.0V(p-p)/
75
Ω
/UTP
1.0V (p-p)/75
Ω
Horizontal resolution 700 TVL
Min. Illuminance
F1.2
Night mode
AGC Extreme 50IRE SENS UP: OFF 0.3 lx (Color) / 0.03 lx (B/W) 0.07 lx (Color) / 0.007 lx (B/W)
SENS UP: ON (x512) 0.0006 lx (Color) / 0.00006 lx (B/W) 0.00014 lx (Color) / 0.000015 lx (B/W)
30IRE SENS UP: OFF 0.15 lx (Color) / 0.015 lx (B/W) 0.035 lx (Color) / 0.0035 lx (B/W)
SENS UP: ON (x512) 0.0003 lx (Color) / 0.00003 lx (B/W) 0.00007 lx (Color) / 0.000007 lx (B/W)
S/N ratio More than 50dB (At AGC Off)
Gamma characteristic 0.45
Sync. System Internal synchronization (INT.) / Line Lock (L.L.)
Electronic shutter Electronic shutter ON: 1/50 s to 1/100,000 s.
* The shutter speed ranging from 1/1,000 s to 1/5,000 s can be set by 1/500 s.
1/50 sec. fixed (Flickerless: OFF), 1/120 sec. fixed (Flickerless: ON)
Iris control DC IRIS DC-drive auto-iris lens
AES Fixed iris lens (1/50-1/100,000 sec. automatic electronic shutter)
AIC Control of electronic shutter and iris (1/50-1/100,000 sec.)
*The WDR mode is 1/50-1/500 sec.
VIDEO IRIS Video-drive auto-iris lens
Vcc = 9.4 V DC, 50mA max, video signal: 0.7V (p-p) (high impedance)
Wide Dynamic Range (WDR) Max 82dB
Backlight Compensation (BLC) ON / OFF
White balance ATW (Normal / Wide) / AWB / Manual
SENS UP ON: Auto (x2 to x512) / OFF
Day/Night setting Auto / Color Fix / B/W Fix
Noise Reduction (2D/3D-DNR) Extreme / High / Middle / Low
Electronic zoom ON (16 times max.) / OFF
Defog Image correction ON / OFF
Profile setting standard / high sensitivity / casino / sodium vapor lamp / profile
AGC ON (Extreme / High / Middle / Low) OFF
ALC -20 to +20
HLC Detection level: 1-3 steps
Easy focus Enabled
Privacy Mask ON (16 spots max., 10 colors, mosaic) / OFF
Motion detection Detects all areas. 6 (horizontal) × 4 (vertical),
24 pixels in total (minimum block), sensitivity (1–10)
Stabilizer ON / OFF
Monitor output mode CRT / LCD
Communication function RS485 communication, half duplex (models
with communication function only)
- RS485 communication, half duplex
(models with communication function only)
Power source 24 V AC ± 10%
(50/60 Hz ± 1 Hz)
or 12 V DC ± 10%
230 V AC ±10%
(50Hz ± 1Hz)
24 V AC ± 10%
(50/60 Hz ± 1 Hz)
or 12 V DC ± 10%
24 V AC ± 10%
(50/60 Hz ± 1 Hz)
or 12 V DC ± 10%
230 V AC ±10%
(50Hz ± 1Hz)
Power consumption 12 V DC 310mA - 310mA 310mA -
24 V AC 250mA, 3.7W - 250mA, 3.7W 250mA, 3.7W -
230 V AC - 30mA, 5.1W - - 30mA, 5.1W
Operating temperature/humidity -10°C to +50°C, 85% or lower humidity (no condensing)
Storage temperature/humidity -20°C to +60°C, 95% or lower humidity (no condensing)
External dimensions 60 (W) x 54 (H) x 119.4 (D) mm
Weight 320g 600g 330g 320g 600g
Input/Output
terminals Video output BNC BNC / 2p terminal BNC
Auto-iris terminal 4P connector (D4-157J-250/equivalent)
Power supply terminal 2P screwless
terminal block
AWG16-24
2-core 2.0m cord 2P screwless
terminal block
AWG16-24
2P screwless
terminal block
AWG16-24
2-core 2.0m cord
B/W Mode-Fix terminal 2P screwless terminal block AWG22-26 - 2P screwless terminal block AWG22-26
RS485 communication terminal 4P screwless terminal block AWG22-
26 (models with communication
function only)
- 4P screwless terminal block AWG22-
26 (models with communication
function only)
UTP terminal - 2P screwless
terminal block
AWG22-26
-
Adjustment switch OSD switch Push-button switch with 5 contact points (in 4 directions and at a central point)
Iris mode switching switch Slide switch
Termination resistance switch Slide switch (models with
communication function only)
- Slide switch (models with
communication function only)
UTP/BNC switching switch - Slide switch -
Accessories OSD Operation Manual, Instruction manual (this document)
* The specifications and/or appearance of the product may change without a prior notice.