ADJUSTMENT
INSTALLATION
1. Direction and Lens
The camera body is set in a tri-axial mounting allowing movement in the
pan, tilt and rotational planes.
1) Adjust the direction of the lens so it faces the subject
2) Move the lever to adjust focus and angle of view
3) When you finished adjusting the direction of the lens, tighten the locking
screw with a screwdriver.
1)
3)
2)
Surface mount
Flush mount
(embedding in ceiling or wall)
(Attaching to a gang box)
* Use the elastic band to
hang the camera unit
upon necessity for the
installation.
WARNING
: Do not
release your hands
from the camera
unit until securing it.
* Mounting
Adaptor Ring
(optional)
* Camera Unit
Please use fixing screws suitable for the material of the ceiling or wall when
attaching the camera body. The mounting screws provided are not recommended
to use at all conditions.
☞
Attention
*
Surface mount
This section explains how to install the unit where cables are running through the
interior of the ceiling or wall.
1. Drilling holes in the ceiling or wall: Use the template included to mark out the
position on the ceiling or wall where you want to install the unit.
2. When running cables through the interior of the ceiling or wall : Use the template,
and drill two or three holes for screws used to attach the camera body and one hole
for the cables (Cables).
*
Flush mount
- Embedding in the ceiling or wall
Be sure to use the Mounting Adaptor Ring when embedding the unit in the ceiling or wall
1. Drilling holes in the ceiling or wall : Use the template included to mark out
the position on the ceiling or wall where you want to install the unit.* Use the template,
drill 4 holes for screw used to attache the Mounting Adaptor Ring. Then, follow the
perforations on the template and cut out a hole to embed the camera body.
2. Attaching the Mounting Adaptor ring : Attach the adaptor ring to the ceiling or wall to
which you want to attach the camera body. Please use fixing screws suitable for the
material of the ceiling or wall when attaching the camera body. We recommend using
screws with a 4mm diameter.
3. Attaching the camera body : Remove the surface mount cover from the camera
body. Remove the body cover and attached camera body to the Mounting Adapter Ring.
- Attaching to gangbox
1. Remove the surface mount cover from the camera body.
2. Attaching the camera body : Attach the camera body to the gangbox.
Please use screws that are suitable for the gang box.
(Use breakable holes on the camera body bottom)
The picture image may deteriorate when
the lens is leaned toward ceiling or wall
to view through the circled vertical area
and the effect may depending on the
view angles.
☞
Attention
2. OSD Switch and OSD Menu
Use the Multi Tact Switch within the camerra
CBC Co.,Ltd
Tokyo, Japan
www.GANZ.jp
Direction and Enter Guide
Up
Down
Enter
Right
Left
OSD MENU FUNCTION
PRESETS
EXPOSURE
SETUP
WHITE BALANCE
IMAGE ADJUSTMENT
OTHERS
SAVE/RESTORE
EXIT MENU
INDOOR NORMAL OUTDOOR OUTDOOR-EX
COLOR ROLL AGC D/N CONTROL SENSE-UP
IRIS FOCUS
ATW1 ATW2 AWB MANUAL
SHARPNESS COLOR LEVEL DNR
PRIVACY MASK ID SETUP
MOTION DETECTION
RESET CAMERA PREV
SAVE USER SETTINGS
RESTORE USER SETTINGS
RESTORE FACTORY SETTINGS
>
2) EXPOSURE
3) SET UP
When select D/N control AUTO, AGC
is MIDDLE and HIGH selectable.
MAIN MENU
PRESETS <OUTDOOR..>
EXPOSURE..
SET UP..
WHITE BALANCE..
IMAGE ADJUSTMENT..
OTHERS..
SAVE/RESTORE..
EXIT MENU.
>
Attention
Do not change
the above factory-set levels
WARNING
* EXIT : Press the switch for 2 seconds.
7) SAVE/RESTORE
D/N CONTROL
ID SETUP
D-N CONTROL
D<->N CONTROL
OTHERS
N-D CONTROL
PREV. SAVE. CANCEL.
PREV. SAVE. CANCEL.
* EXPOSURE SUB MENU LIST
ON
2X
4X
8X
16X
32X
AUTO..
HIGH
LOW
COLOR
B/W
AUTO..
EXPOSURE
OFF
>
LOW
MIDDLE HIGH
HIGH
MIDDLE LOW
EXPOSURE
>
COLOR ROLL OFF
AGC HIGH
D/N CONTROL <AUTO..>
SENSE-UP AUTO..
PREV. SAVE. CANCEL.
SENSE-UP
SENSE-UP
AUTO SENSE-UP SETUP
PREV. SAVE. CANCEL.
2X
EXPOSURE
CAMERA ID SETUP
ID DISPLAY
CAMERA ID:
ID POSITION
>
COLOR ROLL OFF
AGC HIGH
D/N CONTROL AUTO..
SENSE-UP <AUTO..>
PREV. SAVE. CANCEL.
COLOR ROLL OFF
AGC MIDDLE
D/N CONTROL AUTO..
SENSE-UP AUTO..
PREV. SAVE. CANCEL.
MAIN MENU
PRESETS <OUTDOOR..>
EXPOSURE..
SET UP..
WHITE BALANCE..
IMAGE ADJUSTMENT..
OTHERS..
SAVE/RESTORE..
EXIT MENU.
>
>
IRIS..
DC IRIS CONTROL
AUTO
0
121
255
-48
-12
O
60
FULL OPEN
IRIS SPEED
AI THRESH
FOCUS METER
WHITE LINE : AREA LOCATION
GREEN LINE : AREA SCALE
RED LINE : AREA SCALE
*EXIT : Press the switch for 2 seconds.
WHITE LINE : AREA LOCATION
GREEN LINE : AREA SCALE
RED LINE : AREA SCALE
*EXIT : Press the switch for 2 seconds.
WHITE COLOR : AREA LOCATION
BLUE COLOR : AREA SCALE
SET FOCUS REGION..
FOCUS..
BLACK
WHITE
RED
>
>
0
25
255
ACTIVITY THR
SET ACTIVITY ZONES
ADJUST ZONE 1
1 ZONES
ADJUST ZONE 4
~
6) OTHERS
MAIN MENU
PRESETS <OUTDOOR..>
EXPOSURE..
SET UP..
WHITE BALANCE..
IMAGE ADJUSTMENT..
OTHERS..
SAVE/RESTORE..
EXIT MENU.
>
>
MAIN MENU
PRESETS <OUTDOOR..>
EXPOSURE..
SET UP..
WHITE BALANCE..
IMAGE ADJUSTMENT..
OTHERS..
SAVE/RESTORE..
EXIT MENU.
>
>PRIVACY MASK SETUP..
ID SETUP..
MOTION DETECTION
SAVE/RESTORE
RESET CAMERA.
PREV.
SAVE USER SETTINGS.
RESTORE USER SETTINGS.
RESTORE FACTORY SETTINGS.
PRIVACY MASK
OFF
UP-LEFT
ON..
MASK 1 ON.. OFF
OFF ON..
MASK 6
~
MASK COLOR
UP-CENTER
UP-LEFT
UP-RIGHT
DOWN-LEFT
DOWN-RIGHT
1 ZONES
1-2 ZONES
1-3 ZONES
1-4 ZONES
MOTION DETECTION SET UP
MOTION DETECTION SETUP
ALARM
SETUP ALARM ZONE..
>
OFF
ON..
>
4) WHITE BALANCE
(wider range)
(narrower range)
ATW1
ATW2
MANUAL..
AWB
MAIN MENU
PRESETS <OUTDOOR..>
EXPOSURE..
SET UP..
WHITE BALANCE..
IMAGE ADJUSTMENT..
OTHERS..
SAVE/RESTORE..
EXIT MENU.
>
>
-20
-18
13
20
RED
BLUE
-20
20
5) IMAGE ADJUSTMENT
MAIN MENU
PRESETS <OUTDOOR..>
EXPOSURE..
SET UP..
WHITE BALANCE..
IMAGE ADJUSTMENT..
OTHERS..
SAVE/RESTORE..
EXIT MENU.
>
>
-8
0
8
SHARPNESS
COLOR LEVEL
DNR
MIDDLE
MIDDLE
LOW
HIGH
-8
0
8
1) PRESETS
Turn the Switch toward Left or Right side
Right
Left
MAIN MENU
PRESETS <OUTDOOR..>
EXPOSURE..
SET UP..
WHITE BALANCE..
IMAGE ADJUSTMENT..
OTHERS..
SAVE/RESTORE..
EXIT MENU.
>
AREA SETTING
AREA <NORMAL..>
PREV. SAVE. CANCEL.
>
OUTDOOR-EX
OUTDOOR
NORMAL
INDOOR
LOWER
CENTER
NORMAL
* START MAIN MENU
Press the Middle Multi Tact Switch for about 2 seconds,
the main setup menu is displayed on the monitor screen
Select the function
by using the switch
* A function with the icon
has sub menus.
To select a sub menu,
select a function with
the icon and press
the switch
Up
Down
Enter
MAIN MENU
PRESETS <OUTDOOR..>
EXPOSURE..
SET UP..
WHITE BALANCE..
IMAGE ADJUSTMENT..
OTHERS..
SAVE/RESTORE..
EXIT MENU.
>
