ADJUSTMENT
INSTALLATION
2. OSD Switch and OSD Menu
Use the Multi Tact Switch within the camerra
* BT Series
* BX Series
Direction and Enter Guide
Down
Down
Enter
Right
Left
This camera can be adjusted easily for
viewing in all directions.
After attaching the camera on the wall or
ceiling, adjust camera for the desired
direction.
Then tighten each locking ring and lock
rings with allen wrench as shown in
pircture.
Adjusting the camera direction
Adjusting the view angle and focus
1. Direction and Lens
For ZC-BT series
1) Move the lever to adjust focus and
zoom after taking off the Front Cover
2) Tuurn focus and zoom levers in clock
wise direction to fix the poositions
For ZC-BXseries
Turn the exterior Focs and Angle of
viewing Screw to make adjust by screw-
driver.
BT
BX
*
Attaching to the ceiling or wall
This section explains how to install the unit where cables are running through the
interior of the ceiling or wall.
1.Drilling holes in the ceiling or wall:
Use the template included to mark out the position on the ceiling or wall where you
want to install the unit.
2.When running cables through the interior of the ceiling or wall :
Use the template, and drill three holes for screws used to attach the camera body and
one hole for the cables (Cables).
*
Special instruction
To ensure the best low light performance, this camera has IR LED device to change
automatically to night mode when the environment gets dark. If the high light source
or some object reflecting very bring light is placed within 1m from the installed camera,
it interferes with IR LED performance so that Day & Night function may not perform well.
Ensure that the field conditions are suitable before installing the camera unit.
Attaching to the ceiling
Attaching to the wall
Right
Left
Up
OSD MENU FUNCTION
PRESETS
EXPOSURE
SETUP
WHITE BALANCE
IMAGE ADJUSTMENT
OTHERS
SAVE/RESTORE
EXIT MENU
INDOOR NORMAL OUTDOOR OUTDOOR-EX
COLOR ROLL AGC D/N CONTROL SENSE-UP
IRIS FOCUS
ATW1 ATW2 AWB MANUAL
SHARPNESS COLOR LEVEL DNR
PRIVACY MASK ID SETUP
MOTION DETECTION
RESET CAMERA PREV
SAVE USER SETTINGS
RESTORE USER SETTINGS
RESTORE FACTORY SETTINGS
>
2) EXPOSURE
3) SET UP
When select D/N control AUTO, AGC
is MIDDLE and HIGH selectable.
MAIN MENU
PRESETS <OUTDOOR..>
EXPOSURE..
SET UP..
WHITE BALANCE..
IMAGE ADJUSTMENT..
OTHERS..
SAVE/RESTORE..
EXIT MENU.
>
Attention
Do not change
the above factory-set levels
WARNING
* EXIT : Press the switch for 2 seconds.
D/N CONTROL
D-N CONTROL
D<->N CONTROL
N-D CONTROL
PREV. SAVE. CANCEL.
* EXPOSURE SUB MENU LIST
ON
2X
4X
8X
16X
32X
AUTO..
HIGH
LOW
COLOR
B/W
AUTO..
EXPOSURE
OFF
>
LOW
MIDDLE HIGH
HIGH
MIDDLE LOW
EXPOSURE
>
COLOR ROLL OFF
AGC HIGH
D/N CONTROL <AUTO..>
SENSE-UP AUTO..
PREV. SAVE. CANCEL.
SENSE-UP
SENSE-UP
AUTO SENSE-UP SETUP
PREV. SAVE. CANCEL.
2X
EXPOSURE
>
COLOR ROLL OFF
AGC HIGH
D/N CONTROL AUTO..
SENSE-UP <AUTO..>
PREV. SAVE. CANCEL.
COLOR ROLL OFF
AGC MIDDLE
D/N CONTROL AUTO..
SENSE-UP AUTO..
PREV. SAVE. CANCEL.
MAIN MENU
PRESETS <OUTDOOR..>
EXPOSURE..
SET UP..
WHITE BALANCE..
IMAGE ADJUSTMENT..
OTHERS..
SAVE/RESTORE..
EXIT MENU.
>
>
IRIS..
DC IRIS CONTROL
AUTO
0
121
255
-48
-12
O
60
FULL OPEN
IRIS SPEED
AI THRESH
FOCUS METER
WHITE LINE : AREA LOCATION
GREEN LINE : AREA SCALE
RED LINE : AREA SCALE
SET FOCUS REGION..
FOCUS..
1) PRESETS
Turn the Switch toward Left or Right side
Right
Left
MAIN MENU
PRESETS <OUTDOOR..>
EXPOSURE..
SET UP..
WHITE BALANCE..
IMAGE ADJUSTMENT..
OTHERS..
SAVE/RESTORE..
EXIT MENU.
>
AREA SETTING
AREA <NORMAL..>
PREV. SAVE. CANCEL.
>
OUTDOOR-EX
OUTDOOR
NORMAL
INDOOR
LOWER
CENTER
NORMAL
* START MAIN MENU
Press the Middle Multi Tact Switch for about 2 seconds,
the main setup menu is displayed on the monitor screen
Select the function
by using the switch
* A function with the icon
has sub menus.
To select a sub menu,
select a function with
the icon and press
the switch
Up
Down
Enter
MAIN MENU
PRESETS <OUTDOOR..>
EXPOSURE..
SET UP..
WHITE BALANCE..
IMAGE ADJUSTMENT..
OTHERS..
SAVE/RESTORE..
EXIT MENU.
>
7) SAVE/RESTORE
ID SETUP
OTHERS
PREV. SAVE. CANCEL.
CAMERA ID SETUP
ID DISPLAY
CAMERA ID:
ID POSITION
*EXIT : Press the switch for 2 seconds.
WHITE LINE : AREA LOCATION
GREEN LINE : AREA SCALE
RED LINE : AREA SCALE
*EXIT : Press the switch for 2 seconds.
WHITE COLOR : AREA LOCATION
BLUE COLOR : AREA SCALE
BLACK
WHITE
RED
>
>
0
25
255
ACTIVITY THR
SET ACTIVITY ZONES
ADJUST ZONE 1
1 ZONES
ADJUST ZONE 4
~
6) OTHERS
MAIN MENU
PRESETS <OUTDOOR..>
EXPOSURE..
SET UP..
WHITE BALANCE..
IMAGE ADJUSTMENT..
OTHERS..
SAVE/RESTORE..
EXIT MENU.
>
>
MAIN MENU
PRESETS <OUTDOOR..>
EXPOSURE..
SET UP..
WHITE BALANCE..
IMAGE ADJUSTMENT..
OTHERS..
SAVE/RESTORE..
EXIT MENU.
>
>PRIVACY MASK SETUP..
ID SETUP..
MOTION DETECTION
SAVE/RESTORE
RESET CAMERA.
PREV.
SAVE USER SETTINGS.
RESTORE USER SETTINGS.
RESTORE FACTORY SETTINGS.
PRIVACY MASK
OFF
UP-LEFT
ON..
MASK 1 ON.. OFF
OFF ON..
MASK 6
~
MASK COLOR
UP-CENTER
UP-LEFT
UP-RIGHT
DOWN-LEFT
DOWN-RIGHT
1 ZONES
1-2 ZONES
1-3 ZONES
1-4 ZONES
MOTION DETECTION SET UP
MOTION DETECTION SETUP
ALARM
SETUP ALARM ZONE..
>
OFF
ON..
>
4) WHITE BALANCE
(wider range)
(narrower range)
ATW1
ATW2
MANUAL..
AWB
MAIN MENU
PRESETS <OUTDOOR..>
EXPOSURE..
SET UP..
WHITE BALANCE..
IMAGE ADJUSTMENT..
OTHERS..
SAVE/RESTORE..
EXIT MENU.
>
>
-20
-18
13
20
RED
BLUE
-20
20
5) IMAGE ADJUSTMENT
MAIN MENU
PRESETS <OUTDOOR..>
EXPOSURE..
SET UP..
WHITE BALANCE..
IMAGE ADJUSTMENT..
OTHERS..
SAVE/RESTORE..
EXIT MENU.
>
>
-8
0
8
SHARPNESS
COLOR LEVEL
DNR
MIDDLE
MIDDLE
LOW
HIGH
-8
0
8
CBC Co.,Ltd
Tokyo, Japan
www.GANZ.jp
