PixelPro GXi Series
ZS1-4DS Installation Guide
09-2014-A
6
3. PART NAMES
3.1. Front Panel
①
System Status LEDs
The LEDs, located on the left side of the front panel, indicate certain system status.
-
Status:
The LED turns on in orange when the encoder is powered on.
-
Data:
The LED turns on in green when the video signal comes in with a proper
connection.
②
Video Input BNC connector
These are video input connectors for connection to a camera. 4 video input channels are
supported.
③
Video input configuration Switch
This switch enables video input to be turned on or off. No video comes in or out with this
switch off and only some test patterns will be displayed on the Webpage. You can change the
video standard format of the device by moving the switch to NTSC side or PAL side as required.
The device needs to be rebooted after moving the switch in order to apply the change.
④
Reset
Reboot the device system or reset the device to its Factory default settings. Refer to the
section “5.3 Reset” and “5.4 Factory default” for more specific information.
○
1
○
3
④
○
2
